UNINET IMAGING INC.- Page 10

UNINET IMAGING INC.

•

BROTHER HL 2030/TN 350 CARTRIDGE REMANUFACTURING INSTRUCTIONS

20. Install the developer roller cover.

© 2007 UniNet Imaging Inc.  All Trademark names are property of their respective owners.  Product brand names mentioned are intended to show compatibility only.  UniNet Imaging does not guarantee or warrant downloaded information.

w w w.

u n i n e t

i m a g i n g . c o m / t e c h n i c a l . a s p

11124 Washington Blvd., Culver City, California USA 90232  •  Ph +1 310 280 9620  •  Fx +1 310 280 0533  •  techsupport2@uninetimaging.com

TEST PAGES

1. To print a test page from these machines, first turn the machine off.
2. Press and hold the “GO” Button, and turn the printer back on.
3. All the LED’s will light up, and go off. 
4. When the TONER LED comes on, release the “GO” button.
5. Press the “GO” Button again; the printer will print out the test page.

This can also be accomplished through the printer driver.

MACHINE TROUBLESHOOTING

These machines have 4 LED’s to indicate the status or various problems. We have listed some of the more common ones here:

1. Yellow Toner light blinking, Green READY Light on: Toner Low
2. Yellow Toner light On, READY light out: Toner out
3. Yellow Drum light blinking, Green READY Light on: Drum life over soon
4. All lights blinking: Service call needed.

When the GO button is pressed, a secondary set of errors will show.

1. TONER Yellow light on: Fuser error
2. DRUM Yellow light on: Laser error
3. TONER Yellow and PAPER Red lights on: Main Motor failure
4. PAPER Red light on: Engine PCB failure

NOTES