UNINET IMAGING INC.- Page 6

UNINET IMAGING INC.

•

BROTHER HL 2030/TN 350 CARTRIDGE REMANUFACTURING INSTRUCTIONS

7. Remove the black plastic spacer from the developer roller
shaft.

8. Remove the E-Ring, and small gear.

© 2007 UniNet Imaging Inc.  All Trademark names are property of their respective owners.  Product brand names mentioned are intended to show compatibility only.  UniNet Imaging does not guarantee or warrant downloaded information.

w w w.

u n i n e t

i m a g i n g . c o m / t e c h n i c a l . a s p

11124 Washington Blvd., Culver City, California USA 90232  •  Ph +1 310 280 9620  •  Fx +1 310 280 0533  •  techsupport2@uninetimaging.com

9. Remove the developer roller.

10. Vacuum the doctor blade and foam feed roller clean. We do
not recommend that the doctor blade be removed and the devel-
oper roller felt seals will be disturbed. Once a new blade is avail-
able, great care will have to be taken not to tear the seals, caus-
ing a leak. The doctor blade can be easily cleaned by blowing the
excess toner off, and wiping down with a lint free cloth. Be very
careful not to leave any lint behind!