7. SEWING- Page 35

7. SEWING

BAS-341F, 342F

28

5. Step on the presser lifter switch (2) to raise the presser

foot.

6. Insert the work piece under the work clamp, and press

the presser lifter switch (2) to lower the clamp.

7. Press the starting pedal (1).

Note

The work clamp will return to the origin, and will
then advance to the sewing start position and
blinking will stop.  This is only required the first
time a program is sewing.

8. Press the starting pedal (1) again to start sewing.

After sewing is completed, the thread cutter will
automatically operate, then the work clamp will rise.

Note

When the power is turned on after once being turned off, the same pattern of sewing can be continued since the
machine will stores the sewing data from the last time.

1942S