10. DIP SWITCH- Page 51

10. DIP SWITCH

BAS-341F, 342F

44

DIP switch 

D

SW No.

When ON

D

-1

The first two stitches at the sewing start will be sewn at low speed (approx. 260 rpm)

D

-2

The last two stitches at the sewing end will be sewn at low speed (approx. 260 rpm)

D

-3

-

D

-4

The last two stitches at the sewing end will be sewn at low speed (approx. 700 rpm)

D

-5

-

D

-6

Slow-speed sewing at the sewing start will be canceled

D

-7

When the upper shaft is stopped, the motor will change direction and the needle bar will return
to the vicinity of the needle up stop position*

D

-8

During an emergency stop, the thread is trimmed and the needle bar stops in the raised position.

* When the motor operates in reverse to raise the needle, the thread take-up will stop at a position which is lower than

its normal stopping position. As a result, the thread take-up will rise slightly at the sewing start, and this may result in
the thread pulling out under certain conditions.