Memory switches (00 - 0F); 11. CHANGING SPECIAL FUNCTION AND USING THE MEMORY SWITCHES- Page 53

11. CHANGING SPECIAL FUNCTION AND USING THE MEMORY SWITCHES

BAS-341F, 342F

46

Memory switches (00 - 0F)

Switch No.

When ON

memo-00

When moving to the home position, the feed plate moves in the order X        Y and the start position
moves in the order Y        X.

memo-01

When moving to the home position, the feed plate moves in the order Y        X and the start position
moves in the order X      Y.

memo-02

The forward position becomes the home position, and movement is in the order Y        X and
X    Y.
Use when there is an obstacle at the center of the work clamp.

memo-03

Eject device operates. (Eject device is available by special order.)

memo-04

Needle stops in up position during emergency stop. (Needle normally stops in down position.)

memo-05

When sewing is finished, the feed plate moves via the machine home position to the start position.

memo-06

After the final stitch, the work clamp rises and then the feed plate returns to the start position.

memo-07

Intermittent work clamp is not used (does not rise).

memo-08

When using an inner clamping device, the clamping presser is ON for 1/4 and OFF for 3/4 of the
pattern. (Inner clamping device is available as an option.)

memo-09

Changes the wiper to air drive. (Air wiper is availabe as an option.)

memo-0A

Jog feeding becomes faster during programming.

memo-0b

ON when a two-stage tensioner is used. (Two-stage tensioner is available as an option.)

memo-0c

Single-pedal operation by means of two-stage work clamp switches. DIP switch A-2 is ON

memo-0d

Clearing the emergency stop switch action is carried out using the STEP BACK switch.

memo-0E

Test feeding is carried out at the same speed as normal sewing. (For checking feed operation)

memo-0F

After sewing is finished, the work clamp automatically opens and closes once. (practice operation)
If memo-0E is ON, the work clamp opens and closes twice.