Setting Beeper Volume; Choosing the Handset Volume; 4 - 4- Page 33

I N I T I A L   S E T U P      

4 - 4

T7BASE-US-FM5.5

Setting Beeper Volume

You can set the beeper to LOW, HIGH or OFF. The default setting is LOW. When the 
beeper is set to LOW or HIGH, the fax machine beeps every time you press a key or 
make an error, and at the end of fax sending or receiving.

1

Press 

Function/Set

, 

1

, 

3

.

2

Press 

 or 

 to select your setting and press 

Function/Set

.

3

Press 

Stop

 to exit.

Choosing the Handset Volume

Before you begin to use the fax machine, you must decide if you need to set the 
handset volume to AMPLIFY:ON for a user who is hearing-impaired. The AMPLIFY 
volume level complies with FCC standards.

VOLUME AMPLIFY: OFF

This default setting is appropriate if none of the users are hearing-impaired. During a 
conversation, users can press 

 or 

 on the control panel to adjust the volume. 

When the handset is replaced, the handset volume remain until you change it again.

VOLUME AMPLIFY: ON–TEMPORARY

This setting is appropriate if some of the users are hearing-impaired. During a 
conversation, users can press 

 or 

 on the control panel to adjust the volume 

to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset volume will 
returns to the default setting of LOW.

VOL AMPLIFY:ON–PERMANENT 

Choose VOL AMPLIFY:ON–PERMANENT if all of the users are hearing-impaired. 
During a conversation, users can press 

 or 

 on the control panel to adjust the 

volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset 
volume returns to the default setting of AMPLIFY.

WARNING

It is important that you do not choose PERMANENT unless all users are 
hearing-impaired. Otherwise, the default setting of AMPLIFY may damage the 
hearing of some users.

When you press 

 or 

 on the control panel to adjust the volume, the display 

shows the setting you are choosing. Each key press changes the volume to the next 
setting.