 ; Check List for Better Sewing ; Check this list if you are having the following problems: - Page 36

Brother 681B-UG User Manual

2014 Dodge Charger SRT Owner Manual

Table of Contents

Brother 681B-UG

681b_UG_coverpage.pdf

1. Knowing Your Sewing

Machine . . . . . . . . . . . . . . . . . . . . . . .2

PRINCIPAL PARTS . . . . . . . . . . . . . . . . . . 2

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . 4

OPERATING YOUR SEWING

MACHINE . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting plug. . . . . . . . . . . . . . . . . 5

Controlling sewing speed. . . . . . . . . . 5

UPPER (NEEDLE) THREAD. . . . . . . . . . . . 6

LOWER (BOBBIN) THREAD. . . . . . . . . . . 7

How to wind bobbin. . . . . . . . . . . . . 7

How to remove bobbin case . . . . . . . 8

How to thread and insert

bobbin case . . . . . . . . . . . . . . . . . . . . 8

How to pull up lower thread . . . . . . . 9

NEEDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

How to change the needle . . . . . . . . . 9

How to check the needle . . . . . . . . . . 9

RELATIVE CHART OF SEWING

MATERIAL, NEEDLE AND THREAD. . . .10

EXTENSION TABLE . . . . . . . . . . . . . . . . . .10

SEW-LIGHT. . . . . . . . . . . . . . . . . . . . . . . . . 11

PRESSER FOOT . . . . . . . . . . . . . . . . . . . . . 11

VARIOUS CONTROLS . . . . . . . . . . . . . . . . 12

Stitch length . . . . . . . . . . . . . . . . . . . .12

Zigzag width . . . . . . . . . . . . . . . . . . . 12

Pressure adjuster . . . . . . . . . . . . . . . . 13

Feed dog . . . . . . . . . . . . . . . . . . . . . . 14

Reverse stitch . . . . . . . . . . . . . . . . . . 14

THREAD TENSIONS . . . . . . . . . . . . . . . . . 15

Upper thread tension. . . . . . . . . . . . . 15

Lower thread tension. . . . . . . . . . . . . 15

2. Straight Stitching . . . . . . . . . . . . . . 17

How to start sewing. . . . . . . . . . . . . . . . . 17

How to change sewing direction. . . . . . . 17

How to finish your sewing

project . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

How to remove final sewing

from machine . . . . . . . . . . . . . . . . . . . . . 18

How to guide and support material. . . . . 18

3. Zigzag Stitching . . . . . . . . . . . . . . . 19

Simple zigzag stitch . . . . . . . . . . . . . . . . .19

Satin stitch . . . . . . . . . . . . . . . . . . . . . . . . 19

Decorative stitches . . . . . . . . . . . . . . . . . 20

4. Using Built-in Patterns . . . . . . . . 21

Triple stretch stitch . . . . . . . . . . . . . . . . . 21

Blind stitch . . . . . . . . . . . . . . . . . . . . . . . 22

Shell stitch . . . . . . . . . . . . . . . . . . . . . . . 22

5. Various Other Stitches. . . . . . . . . 23

Buttonholes . . . . . . . . . . . . . . . . . . . . . . . 23

Mending . . . . . . . . . . . . . . . . . . . . . . . . . 24

Attaching lace . . . . . . . . . . . . . . . . . . . . . 24

Appliquéing . . . . . . . . . . . . . . . . . . . . . . . 25

Cording. . . . . . . . . . . . . . . . . . . . . . . . . . 25

Monogramming . . . . . . . . . . . . . . . . . . . . 26

Embroidering . . . . . . . . . . . . . . . . . . . . . 27

Button sewing . . . . . . . . . . . . . . . . . . . . . 28

Darning . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Cloth guide . . . . . . . . . . . . . . . . . . . . . . . 29

Narrow Hemming . . . . . . . . . . . . . . . . . . 30

Zipper insertion . . . . . . . . . . . . . . . . . . . 31

6. Maintenance and Care of

Your Machine . . . . . . . . . . . . . . . . . 32

CLEANING . . . . . . . . . . . . . . . . . . . . . . 32

Removing shuttle hook . . . . . . . . . . . 32

Cleaning shuttle race . . . . . . . . . . . . . 33

Cleaning feed dog . . . . . . . . . . . . . . . 33

OILING . . . . . . . . . . . . . . . . . . . . . . . . . . 33

CHECK LIST FOR BETTER SEWING . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

1. Knowing Your Sewing Machine

Principal Parts

2. Zigzag Width Lever

3. Upper Thread Guide and Bobbin Winder

4. Front Thread Guide

5. Pressure Adjuster (See page 13)

7. Thread Tension Dial (See page 15)

8. Thread Cutter

9. Presser Foot Screw

10. Presser Foot (Zigzag)

11. Feed Dog (See page 14)

12. Needle Plate

13. Needle Clamp Screw

14. Shuttle Race cover

15. Drop Feed Knob (See page 14)

16. Reverse Sewing Button (See page 14)

17. Stitch Length Dial

By turning this dial, you can control the length of the stitch.

The higher the number, the longer

the stitch (See page 12)

18. Blind Stitch & Stretch Stitch Lever

20. Bobbin Winder Device

21. Balance Wheel

22. Stop Motion Knob

25. 3-pin Socket

26. Extension table

27. Presser Foot Lifter

When the presser foot is at the highest

position, the tension on the upper thread

28. Sew-light Switch

Turn this knob in any direction to switch

light on and off.

Single Needle No.14 (3 pcs.)

2. Straight Stitch Foot

3. Narrow Hemmer foot

5. Buttonhole Foot

6. Button Sewing Foot

8. Bobbin (3 pcs.)

9. Cloth Guide with Screw

10. Screw Drivers (Large & Small)

Operating Your Sewing Machine

1. First connect three-prong plug in socket.

2. Then connect electric supply plug into wall.

When changing needle, bobbin or light bulb,

or when sewing machine is not use, it is

recommended that electrical supply plug

is disconnected to avoid electrical hazards.

Place foot on control pedal as shown in illustration at left.

When foot controller is pushed down lightly, machine will run at a low speed.

When pressure on foot is increased, sewing machine will pick up speed.

When foot controller is released the sewing machine will stop.

NOTE: Care should be taken that nothing is placed on foot controller when sewing machine is not in use.

Upper (Needle) Thread

Before threading, make sure to raise presser

foot and take-up lever to the highest position.

Then place spool of thread on the spool.

1. Pass thread through the upper thread guide, (rear) and thread guide (front).

2. Now bring thread down and up through

thread tension dial from right to left so that thread picks up thread check spring.

3. Pass thread into the eyelet of the thread take-up lever from right to left. And bring down again and pass through the thread guard.

4. Bring down and pass through the thread guides.

5. Thread needle from left to right and draw the thread out about 15 cm (6 inches).

NOTE: If the threading order is not correct,

thread breakage, stitch skipping,

wrinkling of fabric will occur.

Lower (Bobbin) Thread

HOW TO WIND BOBBIN

1. Loosen stop motion knob by turning it

2. Place an empty bobbin on the bobbin

3. Place thread spool on the spool pin and take

thread through bobbin winder tension disc.

HOW TO REMOVE BOBBIN CASE

1. Raise needle to its highest position.

2. Open the shuttle cover.

3. Pull and open the latch of bobbin case.

4. Pull out bobbin case from the shuttle.

HOW TO THREAD AND INSERT BOBBIN CASE

Unwind about 8 cm (3- inches) of thread from the bobbin. Insert wound bobbin into

2. Pull trailing thread into the slot case.

3. Pull thread to the left under the tension spring until thread enters into delivery eye.

4. Holding case latch

with the metal finger of case pointing up, fit it into the notch at the top of the shuttle race.

5. Release latch and push case to the right making sure the case is in the proper position. Close the Shuttle Cover.

NOTE: The thread drawn out of the case is to be left hanging below the race. Leave about 15 cm ( 6 inches ) hanging.

HOW TO PULL UP LOWER THREAD

1. Raise needle and presser

foot to the highest point.

With left hand, hold the end

of upper thread and with

right hand, turn balance wheel toward you until the needle moves down and up again to its highest position.

2. Now upper thread catches

the lower thread in a loop.

Pull upper thread toward you so that lower thread will come up in a large loop from the presser foot.

3. Pull both threads under the toes of presser foot and place them to the rear leaving about 10 cm ( 4-inches).

HOW TO CHANGE THE NEEDLE

Raise needle to its highest position.

2. Loosen needle clamp screw and remove

3. Insert new needle up into needle clamp hole

as far as it will go against the needle stop.

Make sure the flat side of needle faces toward the right side and the long groove toward left.

4. Tighten needle clamp screw securely.

HOW TO CHECK THE NEEDLE

For smooth sewing, needle must be straight and sharp.

To check if the needle is bent, place the flat side of the needle down on slide plate as shown in illustration.

Relative Chart of Sewing Material, Needle and Thread

SEWING MATERIAL

Fine tricot, Fine Lace, Thin linen, Silk, Tulle, Chiffon

9

Fine Mercerized Cotton

Organdy, Jersey, Voile, Taffeta, Synthetics, Silk

Cotton, Gingham, Poplin, Percale, Pique, Satin,

Velvet, Lightweight wool, Fine corduroy, Suitings.

Mercerized 50~60

Denim, Gabardine, Tweed, Corduroy

Mercerized Heavy Duty

Canvas, Overcoatings, Upholstery

Mercerized Heavy Duty

NOTE: The same size thread should be

used for upper and lower threads.

Extension Table

This sewing machine has an extension table which

converts it into a flat-bed machine.

To insert the extension table:

1. Slide the extension to the right as shown in illustration.

2. To remove extension table, just pull it to the left.

681b_UG_pages11_21.pdf

To change the bulb:

1. Swing open face plate.

2. Remove bulb by turning counter-clockwise.

3. After replacement, close the face plate.

1. Make sure new bulb is the same specification as old one.

2. Make sure to switch off the light and pull out supply plug when you replace the bulb in order to avoid electric hazards.

To remove the presser foot;

1. Raise needle to its highest position.

2. Raise presser foot.

3. Loosen presser foot thumb screw and remove presser foot.

4. To attach the presser foot, place grooved side of the foot against the flat of the presser bar.

Tighten thumb screw.

The stitch length is regulated by turning the

stitch length dial.

Numerals on the dial represent the stitch length.

THE HIGHER THE NUMBER, THE LONGER THE STITCH.

To increase the stitch length, turn stitch length dial counter-clockwise to larger number on the dial.

To decrease the stitch length, turn dial clockwise to smaller on the dial.

1. The “0” on the dial means that the material is not being fed.

2. Always set at 4 when you sew triple stretch stitch (See page21).

The zigzag width is regulated by operating the zigzag width lever.

Numerals above the lever represent the width of stitch.

THE HIGHER THE NUMBER, THE WIDER THE STITCH.

The “0” means straight stitch only.

NOTE: Do not move the lever while the needle is in the material.

PRESSURE ADJUSTER

Correct pressure on presser foot is important to obtain the smooth sewing.

Regulate presser according to type and thickness of the materials to be sewn.

1. To regulate the pressure, lower presser foot.

2. Push outer ring of pressure adjuster down, and inner pin will spring up to its highest position. In this position, pressure is completely released from the presser foot.

3. To increase pressure, push inner pin down with your finger.

NOTE: You will be able to select the correct combination by referring to the table below.

Proper use of Feed Dog is necessary for correct sewing.

1. “DOWN” is used for special sewing such as

darning, embroidery, etc.

2. “UP” is used for general sewing.

Push the Reverse Sewing Button in as far as it will go to sew in reverse position.

Release Reverse Sewing Button and you are back to sewing in a forward position. Reverse sewing is used for tacking and reinforcement.

THREAD TENSIONS

It is important that tension of upper and lower threads be equal to prevent puckering of

material or other problems.

It is recommended that a test sample be made before starting to sew.

UPPER THREAD TENSION

To regulate upper thread tension, merely turn thread tension dial with your thumb after lowering the presser foot.

THE HIGHER THE NUMBER, THE TIGHTER THE TENSION.

To increase tension: Turn dial to right to

To decrease tension: Turn dial to left to

smaller number.

NOTE: The zigzag stitch requires less upper tension than the straight stitch.

LOWER THREAD TENSION

Although lower thread tension has already been adjusted at the factory, when sewing very thin or heavy materials it may have to be readjusted.

To regulate the lower thread tension, turn small screw on the tension, spring of the bobbin case with the small screw driver.

To increase tension: Turn the small screw

clockwise very slightly.

To decrease tension: Turn the screw counterclockwise very slightly.

PERFECT STITCHING

Tension of upper and lower threads should

be equal, just sufficiently strong to lock

both threads in material.

Perfect stitching appears flat with no

puckering of material.

INCORRECT STITCH (A)

When the upper thread lies on the surface

of the material by pulling the lower thread

This is caused by tight tension on the upper

thread or loose tension on the lower thread.

To correct this, turn the upper thread tension

dial to a lower number.

If perfect stitching cannot be obtained by adjusting upper thread tension, adjust bobbin tension.

INCORRECT STITCH (B)

When the lower thread lies on the under surface of the material by pulling upper thread down as shown.

This is caused by loose tension on the upper thread or tight tension on the lower thread.

To correct this, turn the upper thread tension dial to a higher number.

If perfect stitching cannot be obtained by adjusting upper thread tension, adjust bobbin tension.

NOTE: It is recommended that a test sample

is made before starting to sew.

2. Straight Stitching

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

HOW TO START SEWING

1. Raise needle to its highest position and lift presser foot.

2. Place material under presser foot and position needle about one half inch (10mm) from material edge.

3. Lower presser foot.

4. For reverse sewing push Reverse Sewing

button sewing is used wherever reinforcement is needed.

5. Release Reverse Sewing Button and start

sewing in forward position.

NOTE: Do not pull the material. Let the machine do the work. Merely guide the material with your fingers. If you pull the material, your needle might either bend or break.

HOW TO CHANGE THE SEWING DIRECTION

1. Stop machine at the turning point while the needle is in the material.

2. Raise the presser foot and turn the material to the new direction while the needle acts as the axis.

3. Lower presser foot and sew in new direction.

HOW TO FINISH YOUR SEWING PROJECT (REVERSE STITCHING)

Reverse stitching is used to reinforce stitches near the edge of material or wherever reinforcement is needed.

1. That is done by stitching to the material edge… then stopping.

2. Push Reverse Sewing Button and stitch backwards for ½ inch (10mm) from material edge.

HOW TO REMOVE FINAL SEWING FROM MACHINE

1. Stop the machine.

2. Raise needle to its highest position and make sure that the thread take-up lever is in the highest position also.

3. Lift presser foot and pull out the material gently to the left side diagonally.

4. Cut both threads on the thread cutter.

5. Leave 4 inches (10cm) of thread between the presser foot loose while the thread take-up lever is at highest position. You are ready to sew.

HOW TO GUIDE AND SUPPORT MATERIAL

Generally it is enough to guide the material in front of the presser foot as shown in the upper illustration.

However, in case of special materials such as tricot, crepes, knits, etc., we recommend you to support the material both in front and back of the presser foot with gentle tension as shown in the lower illustration.

3. Zigzag Stitching

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

SIMPLE ZIGZAG STITCH

Set the Stitch zigzag, sew about 1-4 to

obtain simple zigzag stitch.

1. Before stitching zigzag, sew about 5-6

Straight stitches with stitch length between for reinforcement.

2. Set zigzag width lever to your desired width and commence to sew.

3. Before removing work from machine, reset the zigzag lever to “O” and sew 5-6 stitches for reinforcement.

NOTE: Generally, zigzag stitch requires less

upper thread tension than the straight

When the Stitch Length Dial is set to between the “SATIN STITCH” is produced.

This is used to make buttonholes and various decorative stitches.

NOTE: It is recommend that a test sample

is made before starting to sew.

DECORATIVE STITCHES

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

Using the “SATIN STITCH” various decorative stitches are produced by using the zigzag width lever as follows:

4. Using Built-in Patterns

TRIPLE STRETCH STITCH

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

Set Blind Stitch and Stretch Stitch Lever at

as shown in illustration at left.

The “Triple Stretch Stitch” is used for any

stretch material such as knitted fabric, tricot, etc. This stitch is three times the strength of a regular stitch and gives elasticity to seams which prevents breakage of thread.

NOTE: With zigzag width lever set at 4, a

triple zigzag stitch is produced which

can be used as a decorative stitch.

681b_UG_pages22_32.pdf

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

SET BLIND STITCH AND STRETCH STITCH LEVER AT

1. Fold material to size of hem desired and

then fold back as shown in Figure A,

leaving ¼ inch (6mm) overlap at edge.

2. Sew on fold as in Figure B.

3. When material is unfolded you will have a blind stitched hem as in Figure C.

NOTE: Thread used should be the same

color as material used.

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

This can be used for sewing a picoted

edge on a light material.

1. Set the machine as for blind stitch.

2. Sew material on bias, placing material

under the presser foot so that straight

stitches are sewn on seam line and zigzag stitches are sewn slightly over seam edge.

3. The “SHELL STITCH” requires a little

tighter upper thread tension than normal.

4. Sew at slow speed.

5. Edge of material becomes picoted.

5. Various Other Stitches

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Set zigzag width lever to 2.

2. Set drop feed to Up.

3. Lower presser foot and commence to sew

predetermined length.

4. Stop machine when the needle is in the

material at the right side of row.

1. Lift the presser foot and run material 180 degree

while the needle acts as the axis.

2. Lower the presser foot and raise the needle from

material by turning balance wheel toward you.

3. Set zigzag width lever to 4 and drop feed

4. Commence to sew 5 to 6 stitches and stop

the machine when the needle is in the material

at the left side of the row.

1. Lift the presser foot slightly and set the feed

dog knob to Up.

2. Raise the needle and set the zigzag width

3. Sew row to predetermined length.

4. Stop the machine when the needle is in the

material at the left side of row.

1. Raise the needle and set the feed dog knob to

2. Set the zigzag width lever to 4.

3. Sew 5-6 stitches across to finish buttonhole, then turn material 90 degrees clockwise and sew 5-6 straight stitches to secure stitching.

4. Lift presser foot and remove work from

1. It is recommended that a sample buttonhole

be made starting to sew.

2. Use tailor’s chalk to mark length of buttonhole.

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Place reinforcement material under

material to be repaired.

2. Sew both edges of tear together.

3. Use satin stitch to strengthen and secure

ends of tear as in illustrations.

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Place lace under material edge letting it

overlap ¼ inch (6 mm).

2. Place under presser foot and sew.

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Baste cut design to the material.

2. Following the design, commence to sew

3. Cut away the surplus material close to the

4. Remove basting.

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. In accordance with thickness of cord being

used, set zigzag width lever.

2. Place cord on fabric to be sewn.

3. Lower presser foot and sew using zigzag

stitch. Guide cord by hand to where you

MONOGRAMMING, USING EMBROIDERY HOOP

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Remove presser foot.

2. Draw lettering on the right side of the material.

3. Stretch work between embroidery hoops as firmly as possible.

4. Place the work under the needle and lower presser bar.

5. Pull lower thread up through the material

at starting position by turning balance wheel and holding both threads.

6. Hold the hoop with thumb and forefinger of both hands while pressing the material with middle and third fingers and supporting the outside of hoop with smaller finger.

7. Start sewing, moving hoop lightly along the lettering with even rate of speed while controlling zigzag width lever with your right hand.

EMBROIDERING, USING EMBROIDERY HOOP

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Remove presser foot.

2. Draw design on the material.

3. Use embroidery hoop as you would for

4. Position the hoop under the needle and lower presser bar.

5. Pull lower thread up through material.

6. Stitch outline of design by removing embroidery hoop accordingly.

7. To fill in design stitch from outline of design to inside and from inside to edge of outline alternately until design is completely filled in. Keep stitching close together.

NOTE: A long stitch is made by removing embroidery hoop rapidly and a short stitch is made by moving it slowly.

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Put button in place on material to be sewn.

Place under presser foot.

2. Set zigzag width control to regulate distance of stitch between the holes in the button.

3. Lower presser foot and check to see that

needle enters holes in button properly.

4. Slowly sew approximately 10 stitches.

5. Stop machine and raise needle from the

6. Turn zigzag width lever to 0.

7. Sew approximately three stitches in one of the holes in the button to secure it.

8. Remove work and cut threads.

BUTTON SEWING WITH THREAD SHANK

For heavier material use the following method to sew on buttons:

1. Place a needle on the button as shown in

illustration and then sew on button as you would regularly. (see above)

2. When removing work from machine leave a long upper thread to be used to form a thread shank.

3. Pull the upper thread through the hole of

button between button and material to form thread shank.

With normal sewing needle sew in thread ends.

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Place portion to be darned under the presser foot.

2. Lower presser foot.

3. Sew alternately drawing the work gently away from you and pulling it toward you.

4. Repeat this motion until the portion to be

darned is filled with parallel lines of stitching.

The cloth guide helps to make straight and

parallel stitches follow the edge of the material.

To attach the cloth guide, place it over two

holes to the right of the needle plate in the

sewing machine bed.

Place thumb screw through the guide slot,

adjusting the guide for the desired distance

and fasten it securely.

By using narrow hemmer foot a neat scroll type hem

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Cut top corner of the material about 0.3cm (1/8”).

2. Place material wrong side up and insert cut off angel into foot opening.

3. Pull material by hand from the back of the presser foot.

Make sure the needle is positioned over material.

Lower presser foot.

4. Make sure upper and lower threads are placed behind presser foot.

5. Sew at medium speed. Guide the material by hand through the presser foot opening.

NOTE: With zigzag width lever set a 3, zigzag narrow hemming can be done following the above procedure.

ZIPPER INSERTION

Zipper foot is used to sew various types of

zippers and can easily be positioned to right

or left side of needle.

When zipper is being sewn at left side of needle, position zipper foot by loosening thumb screw and sliding zipper foot to right.

When zipper is being sewn at right side of

needle, position zipper foot by loosening thumb screw and sliding zipper foot to left.

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Lower needle into side notch located on

presser foot. (right or left)

2. Tighten thumb screw to lock presser foot into position.

3. Fold edge of material ¾ inch (2cm) and

place zipper under folded portion.

4. By guiding zipper foot along the zipper teeth you will stitch close to edge of zipper in correct position.

5. To sew opposite side of zipper, loosen thumb screw and position zipper foot. (right or left)

6. Maintenance and Care of Your Machine

The sliding parts of the shuttle race body and the hook must be cleaned regularly so that lint does not accumulate.

REMOVING SHUTTLE HOOK

1. Raise needle to its highest position.

2. Open the shuttle race cover.

3. Take out bobbin case.

4. Push latch levers down and remove retaining ring.

5. Remove hook by grasping center post of

NOTE: When needle is lowered,

hook cannot be removed.

CLEANING SHUTTLE RACE

1. Remove accumulated lint and thread from the retaining ring, hook, driver and race body with brush.

2. A cloth dampened with machine oil should be used to wipe shuttle race clean.

3. Clean shuttle hook in the same manner as above.

CLEANING FEED DOG

1. Take out free arm upper plate by loosening the screw on it.

2. Clean upper part of feed dog and shuttle race body with brush.

ADP99.tmp

For smooth and silent operation the moving parts of the machine should be oiled periodically. (see diagram below)

OIL ONCE A WEEK IF MACHINE IS USED MORE THAN ONE HOUR.

PER DAY. IF MACHINE IS USED MORE OFTEN OIL EVERY DAY.

NOTE: If machine has not been used for along period of time, oil tends to coagulate and operation of machine will not be smooth. To ensure best operation in such a case, apply a small amount of benzine to oiling points as noted in diagram. For motor; One or two drops of oil twice a year is recommended.

Check List for Better Sewing

Check this list if you are having the following problems:

IF MATERIAL IS NOT FED

1. Feed dog is down .

2. Stop motion knob is loose.

3. Stitch length regulator is at 0.

IF NEEDLE BREAKS

1. Needle is inserted incorrectly.

2. Needle clamp screw is loose.

3. Bent needle is used.

4. Upper threading is not correct.

5. Upper thread tension is too tight.

6. Wrong needle and thread for cloth being sewn are used.

7. Material pulled excessively.

IF LOOPS FORM ON FABRIC

1. Tension of upper or lower thread is wrong.

IF MATERIAL SHOULD PUCKER

1. Thread tension is too tight.

2. Threading is not correct.

3. Thread is caught by something.

4. Lower thread is unevenly wound on bobbin.

IF UPPER THREAD BREAKS

1. Upper threading is not correct.

2. Upper thread is too large for needle eye.

3. Upper thread tension is too tight.

4. Needle is inserted incorrectly.

IF LOWER THREADS BREAKS

1. Lower thread is entangled in shuttle.

2. Lower thread tension is too tight.

3. Lower threading is not correct.

IF MACHINE SKIPS STITCHES

1. Needle is not sharp and straight.

2. Needle is inserted incorrectly.

3. Wrong needle and thread for cloth being sewn are used.

4. Upper threading is not correct.

5. Lint is clinging to under-side of needle plate.

M E M O.pdf

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

____________________________________________________________________________________________________________________________________________________________

M E M O.pdf

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

____________________________________________________________________________________________________________________________________________________________

back page 8x10.pdf

Replacement Sewing Manuals

For Reprints Visit on the web. http://www.mastersewusa.com May 2006

background image

Check List for Better Sewing

Check this list if you are having the following problems:

IF MATERIAL IS NOT FED

1.  Feed dog is down .
2.  Stop motion knob is loose.
3.  Stitch length regulator is at 0.

IF NEEDLE BREAKS

1.  Needle is inserted incorrectly.
2.  Needle clamp screw is loose.
3.  Bent needle is used.
4.  Upper threading is not correct.
5.  Upper thread tension is too tight.
6.  Wrong needle and thread for cloth being

sewn are used.

7. Material pulled excessively.

IF LOOPS FORM ON FABRIC

1. Tension of upper or lower thread is

wrong.

IF MATERIAL SHOULD PUCKER

1.  Thread tension is too tight.
2.  Threading is not correct.
3.  Thread is caught by something.
4. Lower thread is unevenly wound on

bobbin.

IF UPPER THREAD BREAKS

1.  Upper threading is not correct.
2.  Upper thread is too large for needle eye.
3.  Upper thread tension is too tight.
4.  Needle is inserted incorrectly.

IF LOWER THREADS BREAKS

1.  Lower thread is entangled in shuttle.
2.  Lower thread tension is too tight.
3.  Lower threading is not correct.

IF MACHINE SKIPS STITCHES

1.  Needle is not sharp and straight.
2.  Needle is inserted incorrectly.
3.  Wrong needle and thread for cloth being

sewn are used.

4. Upper threading is not correct.
5. Lint is clinging to under-side of needle
plate.

-34-

1 ... 3233343536373839

Detailed Information for Brother 681B-UG User Manual

Lists of information found in Brother 681B-UG User Manual - Page 36

1. Feed dog is down .
2. Stop motion knob is loose.
3. Stitch length regulator is at 0.
1. Needle is inserted incorrectly.
2. Needle clamp screw is loose.
3. Bent needle is used.
4. Upper threading is not correct.
5. Upper thread tension is too tight.
6. Wrong needle and thread for cloth being sewn are used.
7. Material pulled excessively.
1. Tension of upper or lower thread is wrong.
1. Thread tension is too tight.
2. Threading is not correct.
3. Thread is caught by something.
4. Lower thread is unevenly wound on bobbin.
1. Upper threading is not correct.
2. Upper thread is too large for needle eye.
3. Upper thread tension is too tight.
4. Needle is inserted incorrectly.
1. Lower thread is entangled in shuttle.
2. Lower thread tension is too tight.
3. Lower threading is not correct.
1. Needle is not sharp and straight.
2. Needle is inserted incorrectly.
3. Wrong needle and thread for cloth being sewn are used.
4. Upper threading is not correct.
5. Lint is clinging to under-side of needle plate.

Related Documents for Brother 681B-UG User Manual

Brother 775 User Manual

Brother PT-1700 User Manual

Brother PT-110 User Manual

Brother QL-570VM User's Guide

Brother HL-1870N User's Guide

Brother MFC J625DW Open Source Licensing Remarks

Brother 882-U70 User Manual

Brother 7550MC User Manual

Brother 1830 User Manual

Brother HL-5240 User's Guide

Brother BM-3600 Quick Start Guide

Brother 885-S61 User Manual

Brother PT 2300 User's Guide

Brother HL-3450CN Quick Setup Guide/ Network Setup Guide

Brother PT-1960 User's Guide

Brother DCP-8020 Quick Setup Guide

Brother DCP-8025D Network User's Guide

Brother DCP7020 User Manual

Brother MFC-3320CN User's Guide

Brother LN9953001 User Manual

Brother CP60X Warranty

Brother PT-1200 User Manual

Brother BE-1201 User Manual

Brother FAX-2920 Quick Setup Guide

Brother HL 2040 User's Guide

Brother PT-2610 User's Guide

Brother LB5000S Warranty

Brother PT-9700PC User's Guide

Brother DK1240 User Manual

Brother DCP-8045D User's Guide

Brother HL-5040 Quick Setup Guide

Brother NX-200 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother CS-8150 User's Guide

Brother HL-5150D Quick Setup Guide

Brother HL-5170DN Command Reference Guide for Software Developers

Brother PT-1600 User's Guide

Brother 885-U02 User Manual

Brother PT-1200 User Manual

Brother BAS-761 User Manual

Brother HL-6180DW Open Source Licensing Remarks

Brother HL-5280DW Command Reference Guide for Software Developers

Brother MFC-J875DW Open Source Licensing Remarks

Brother FAX-1860C Quick Setup Guide

Brother MFC-8460N Network User's Guide

Brother HL-5140 User Manual

Brother Fax User Manual

Brother LX-570 User Manual

Brother MFC-210C Quick Setup Guide

Brother HE 120 User's Guide

Brother HL-6050D User's Guide

Brother XL-3750 User's Guide

Brother MFC-5890CN Quick Setup Guide

Brother ADS2000 User Manual

Brother LB-6800 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother 5490CN User Manual

Brother HL-6050D Command Reference Guide for Software Developers

Brother XS3109 Notification about included accessories

Brother MFC-240C Quick Setup Guide

Brother 5440CN User Manual

Brother Personal Embroidery Design Software System User Manual

Brother MFC-5860CN Quick Setup Guide

Brother PT-2430PC User Manual

Brother HL-2460 User's Guide

Brother SB7500 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother 1034D Warranty

Brother BCL-D20 User Manual

Brother DCP-9040CN Quick Setup Guide

Brother 210C User Manual

Brother PT-9800PCN User's Guide

Brother FAX 1920CN User's Guide

Brother MFC J435W Open Source Licensing Remarks

Brother BES-1216 User Manual

Brother MFC-3340CN User's Guide

Brother PT-55 User Manual

Brother MFC-J4620DW Open Source Licensing Remarks

Brother DCP-135C User Manual

Brother PT-1400 User's Guide

Brother a User Manual

Brother MFC-9420CN Quick Setup Guide

Brother HL-4040CN Network User's Guide

Brother 1670N User Manual

Brother DCP-J152W Open Source Licensing Remarks

Brother DCP-120C User's Guide

Brother MFC-9420CN User's Guide

Brother FAX-1940CN Network User's Guide

Brother MFC J835DW Open Source Licensing Remarks

Brother TD-4000 User's Guide

Brother QL-550 Quick Start Guide

Brother Fax 1360 User's Guide

Brother MFC-7440N User's Guide

Brother MFC-620CN Network User's Guide

2020 Brother LS-2020 User's Guide

Brother FAX-2940 Open Source Licensing Remarks

Brother DCP-L2540DW Open Source Licensing Remarks

Brother PT-2310 User's Guide

Brother FAX-2910 Quick Setup Guide

Brother MFC-J4710DW Open Source Licensing Remarks

Brother MFC-8840D User's Guide

Brother MFC-5840CN Network User's Guide

Brother HL-5240 Command Reference Guide for Software Developers

Brother DCP-8040 Network User's Guide

Brother MFC-J4610DW Open Source Licensing Remarks

Brother MFC-J4510DW Open Source Licensing Remarks

Brother MFC-5490CN Quick Setup Guide

Brother PT-2410 User's Guide

Brother ST150HDH Warranty

Brother 885-U01 User Manual

Brother MFC J5910DW Open Source Licensing Remarks

Brother 882-U10 User Manual

Brother XF0606-001 User Manual

Brother FAX-2480C Quick Setup Guide

Brother 885-U11 User Manual

Brother P-touch 550 User Manual

Brother MFC-845CW Quick Setup Guide

Brother 1300 User Manual

Brother FAX-2580C Quick Setup Guide

Brother HL-5070N Command Reference Guide for Software Developers

Brother MFC-8910DW Open Source Licensing Remarks

Brother 2170W User Manual

Brother MFC-J6925DW Open Source Licensing Remarks

Brother DCP-8020 User's Guide

Brother ST371HD Specification

Brother HL-5470DW Open Source Licensing Remarks

Brother 8060 User Manual

Brother DCP-185C User Manual

Brother PT-2700 User Manual

Brother MFC-7840W Quick Setup Guide

Brother MFC-8840D Quick Setup Guide

Brother DCP8045D User Manual

Brother HL-5170DN Quick Setup Guide

Brother XR-9000 Operation Manual

Brother MFC-7345N Network User's Guide

Brother HL-4200CN Quick Setup Guide

Brother HL-4200CN User's Guide

Brother PT-9500PC User's Guide

Brother MFC-3220C User's Guide

Brother PT-1700 User's Guide

Brother MFC-7420 Quick Setup Guide

Brother MFC-5460CN Quick Setup Guide

Brother HL-L2360DW Open Source Licensing Remarks

Brother MFC-665CW User's Guide

Brother MFC-7345N Quick Setup Guide

Brother 560 User Manual

Brother HL-4040CDN Command Reference Guide for Software Developers

Brother 1940CN User Manual

Brother MFC-5460CN User Manual

Brother PT-1100 User Manual

Brother MFC-8860DN User Manual

Brother 1280 User Manual

Brother MFC-J650DW Open Source Licensing Remarks

Brother MFC-640CW Network User's Guide

Brother MFC-3360C User's Guide

Brother MFC J280W Open Source Licensing Remarks

Brother 1800 User Manual

Brother PT-1950 User's Guide

Brother FAX-2840 Open Source Licensing Remarks

Brother PT-1750 User Manual

Brother HL-2140 Quick Setup Guide

Brother MFC-8860DN Quick Setup Guide

Brother LS-1217 User's Guide

Brother HL-4070CDW User's Guide

Brother ADS2500W User Manual

Brother DCP-8065DN Network User's Guide

Brother HL-5070N Quick Setup Guide

Brother PS9000 User Manual

Brother MFC-7220 Quick Setup Guide

Brother MFC-685CW Network User's Guide

Brother MFC-820CW User's Guide

Brother 2900 User Manual

Brother SE1800 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother MFC-420CN Quick Setup Guide

Brother MFC-8660DN User's Guide

Brother 2340CV User Manual

Brother PE550D Warranty

Brother 1650 User Manual

Brother 1260 User Manual

Brother LN6226001 User Manual

Brother LA3776001 User Manual

Brother 565 User Manual

Brother MFC-L2720DW Open Source Licensing Remarks

Brother 882-W02 User Manual

Brother 7225n User Manual

Brother PT-2700 User's Guide

Brother QL-1050 User's Guide

Brother PT-1090 User's Guide

Brother MFC-J4310DW Open Source Licensing Remarks

Brother HL-5350DN Command Reference Guide for Software Developers

Brother DCP-770CW User Manual

Brother ST4031HD Use and Care Manual

Brother 1300 User Manual

Brother MFC-L8600CDW Open Source Licensing Remarks

Brother PT-2030 User Manual

Brother MFC-7820N Quick Setup Guide

Brother DCP-130C User's Guide

Brother 1230PC User Manual

Brother MFC-L8850CDW Open Source Licensing Remarks

Brother HS-2500 Quick Reference Guide

Brother DCP-8045D Network User's Guide

Brother HL-5050 Command Reference Guide for Software Developers

Brother HL-5070N User's Guide

Brother DCP-7030 User's Guide

Brother HL-5150D Command Reference Guide for Software Developers

Brother 1660e User Manual

Brother QL-700 Raster Command Reference

Brother BCL-D60 User Manual

Brother MFC-7840W User's Guide

Brother MFC-3320CN Quick Setup Guide

Brother HL-4050CDN User Manual

Brother 1010 User Manual

Brother HL-2240D Command Reference Guide for Software Developers

Brother LB5000M Warranty

Brother HL-6180DWT Open Source Licensing Remarks

Brother HL-L2380DW Open Source Licensing Remarks

Brother FAX-1940CN Quick Setup Guide

Brother HL-1450 Command Reference Guide for Software Developers

Brother HL-1650 Command Reference Guide for Software Developers

Brother MFC-8440 Quick Setup Guide

Brother 884-T05 User Manual

Brother LS-1717 User's Guide

Brother MFC-3820CN Quick Setup Guide

Brother HL-2600CN Quick Setup Guide/ Network Setup Guide

Brother MFC-8950DW Open Source Licensing Remarks

Brother FAX-8070P User Manual

Brother MFC-L2705DW Open Source Licensing Remarks

Brother ST371HD Use and Care Manual

Brother 3240C User Manual

Brother HL-4000CN User Manual

Brother HL-5280DW User's Guide

Brother HL-1435 Quick Setup Guide

Brother TD-4100N User's Guide

Brother 2500D User Manual

Brother 770 User Manual

Brother MFC-8870DW Network User's Guide

Brother MFC-640CW User's Guide

Brother MFC-685CW User's Guide

Brother HL-5250DN Quick Setup Guide

Brother MFC-J5920DW Open Source Licensing Remarks

Brother LW6091001 User Manual

Brother HL-7050N Quick Setup Guide

Brother BE-901-PC User Manual

Brother XL-6562 User's Guide

Brother DCP-350C User's Guide

Brother PT-1010 User's Guide

Brother SB4138 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother FAX-2580C User's Guide

Brother PT-2600 User's Guide

Brother MFC J825DW Open Source Licensing Remarks

Brother MFC-8460N Quick Setup Guide

Brother HL-L9200CDWT Open Source Licensing Remarks

Brother SE-400 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother SM2700 Use and Care Manual

Brother DK1219 User Manual

Brother MFC-640CW Quick Setup Guide

Brother SB8000 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother PT-1230PC User Manual

Brother PR1000e Operation Manual for Premium Pack I (Optional accessories)

Brother HL-2170W Quick Setup Guide

Brother FAX 2820 Quick Setup Guide

Brother MFC-8220 Quick Setup Guide

Brother MFC-8460N User's Guide

Brother MFC-8670DN Quick Setup Guide

Brother NX-250 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother 8065DN User Manual

Brother HL-2600CN Command Reference Guide for Software Developers

Brother PT-2710 User's Guide

Brother MFC-9440CN Quick Setup Guide

Brother CS7205 Notification about included accessories

Brother LN6645001 User Manual

Brother 882-U71 User Manual

Brother MFC-8860DN Network User's Guide

Brother PT-9800PCN Network User's Guide

Brother FAX 1920CN Network User's Guide

Brother HL-4040CN Quick Setup Guide

Brother DCP-8110DN Open Source Licensing Remarks

Brother NC-7100W User Manual

Brother PT-1290 User's Guide

Brother MFC-8670DN Network User's Guide

Brother MFC-5840CN User's Guide

Brother SX-4000 User Manual

Brother MFC J425W Open Source Licensing Remarks

Brother MFC-8860DN User's Guide

Brother 7420 User Manual

Brother PT-9400 User Manual

Brother 2440C User Manual

Brother 882-W01 User Manual

Brother BE-1201-PC User Manual

Brother 340 User Manual

Brother ML-300 User Manual

Brother MFC-7340 User's Guide

Brother MFC-9840CDW Network User's Guide

Brother DCP-8025D User Manual

Brother MFC-L2680W Open Source Licensing Remarks

Brother MFC-7820N User's Guide

Brother MFC-8220 Network User's Guide

Brother PT-1600 Quick Reference Guide

Brother HL-2070N Command Reference Guide for Software Developers

Brother HL-1250 Command Reference Guide for Software Developers

Brother PT-9700PC ESC/ P Command Reference

Brother FAX-2910 User's Guide

Brother SM2700 Warranty

Brother DCP-120C Quick Setup Guide

Brother FAX-2440C User's Guide

Brother DCP-7020 Quick Setup Guide

Brother HL-4070CDW Network User's Guide

Brother PT-1830 User's Guide

Brother DCP-8040 Quick Setup Guide

Brother 1290 User Manual

Brother 2920 User Manual

Brother N User Manual

Brother MFC-8640D Quick Setup Guide

Brother MFC-7240 Open Source Licensing Remarks

Brother PT-90 User's Guide

Brother DCP-110C Quick Setup Guide

Brother PT-2110 Software Installation Guide

Brother 1240 User Manual

Brother PT 2100 User's Guide

Brother MFC-8440 User's Guide

Brother HL-7050 Quick Setup Guide

Brother MFC-J245 Open Source Licensing Remarks

Brother MFC-8660DN Network User's Guide

Brother 530 User Manual

Brother 5840CN User Manual

Brother HL-7050 User's Guide

Brother DCP-165C User Manual

Brother 342Fi User Manual

Brother DCP-7020 User's Guide

Brother 1034D Specification

Brother 1810 User Manual

Brother SM1400 Warranty

Brother HL-5170DN User's Guide

Brother MFC-9440CN User's Guide

Brother FAX-1960C Quick Setup Guide

Brother MFC-J450DW Open Source Licensing Remarks

Brother MFC-4820C Quick Setup Guide

Brother MFC-230C Quick Setup Guide

Brother 885-S27 User Manual

Brother MFC-5440CN Network User's Guide

Brother PS-9000 Quick Setup Guide

Brother DCP-8025D User's Guide

Brother 2410 User Manual

Brother PED Basic User Manual

Brother 1250 User Manual

Brother DK1202 User Manual

Brother FAX 2820 User's Guide

Brother 8220 User Manual

Brother MFC-J680DW Open Source Licensing Remarks

Brother XR-65T User's Guide

Brother PT-2710 Software Installation Guide

Brother XL-6452 User's Guide

Brother MFC-465CN Quick Setup Guide

Brother 1180 User Manual

Brother MFC-5860CN User's Guide

Brother 2820 User Manual

Brother MFC-7225N Network User's Guide

Brother HL-2700CN Command Reference Guide for Software Developers

Brother SE425 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother MFC-4820C User's Guide

Brother 2210 User Manual

Brother PT-1230PC User's Guide

Brother DCP-330C User's Guide

Brother MFC-230C User's Guide

Brother PT-1280 User's Guide

Brother HL-6050DN Network User's Guide

Brother HL-5030 User Manual

Brother MFC-9420CN Network User's Guide

Brother WP330MDS User Manual

Brother MFC-5860CN User Manual

Brother PT 1000 User's Guide

Brother HL-2170W Command Reference Guide for Software Developers

Brother HL-1435 User's Guide

Brother MFC-8460N User Manual

Brother PE-300S User's Guide

Brother PS-9000 User's Guide

2000 Brother CM-2000 User Manual

Brother HL-4040CDN User's Guide

Brother 750E User Manual

Brother 1240 User Manual

Brother 2070N User Manual

Brother 2750 User Manual

Brother MFC-3340CN Quick Setup Guide

Brother 6000D User Manual

Brother 2820 User Manual

Brother QL-500 Quick Start Guide

Brother 1840C User Manual

Brother HL-2240 Command Reference Guide for Software Developers

Brother CP-7500 Quick Reference Guide

Brother MFC-J4420DW Open Source Licensing Remarks

Brother LN7629001 User Manual

Brother PT-1230PC User Manual

Brother BE-901 User Manual

Brother PT-1290 User Manual

Brother HL-4000CN User's Guide

Brother 2100 User Manual

Brother PT-1650 User's Guide

Brother MFC-820CW Quick Setup Guide

Brother LN9961001 User Manual

Brother MFC-885CW Network User's Guide

Brother MFC-J475DW Open Source Licensing Remarks

Brother HL-5140 User's Guide

Brother DCP-7045N User Manual

Brother BCL-D10 User Manual

Brother HL-5040 User's Guide

Brother 885 User Manual

Brother 7025 User Manual

Brother HL-L8250CDN Open Source Licensing Remarks

Brother MFC-7340 Quick Setup Guide

Brother FAX 1840C User's Guide

Brother DCP-8025D Quick Setup Guide

Brother PT-2030 User's Guide

Brother FAX-2800 Quick Setup Guide

Brother MFC-J885DW Open Source Licensing Remarks

Brother DCP-330C Quick Setup Guide

Brother PT-2030 User Manual

Brother 580MC User Manual

Brother HL-5450DN Open Source Licensing Remarks

Brother BAS-311G User Manual

Brother SC3000 Notification about included accessories

Brother MFC-8820DN Network User's Guide

Brother MFC-J4320DW Open Source Licensing Remarks

Brother 1660 User Manual

Brother LX-910D User Manual

Brother 884-T09 User Manual

Brother 4100e User Manual

Brother MFC-490CW Quick Setup Guide

Brother MFC-885CW User's Guide

Brother LN9049001 User Manual

Brother MFC-8950DWT Open Source Licensing Remarks

Brother HL-5030 Network User's Guide

Brother MFC-J5720DW Open Source Licensing Remarks

Brother DCP7010 User Manual

Brother MFC-5440CN User's Guide

Brother 8060P MFC-9060 User Manual

Brother 1800 User Manual

Brother MFC-8840D User Manual

Brother FAX 255 User Manual

Brother MFC-8870DW User's Guide

Brother Fax 1360 Quick Setup Guide

Brother 7600 User Manual

Brother LN9963001 User Manual

Brother MFC-7440N Quick Setup Guide

Brother 2200 User Manual

Brother MFC-8510DN Open Source Licensing Remarks

Brother HE-240 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother HL-L2300D Open Source Licensing Remarks

Brother HL-4070CDW Command Reference Guide for Software Developers

Brother PT-7100 User's Guide

Brother FAX-1860C User's Guide

Brother PT-1650 Quick Reference Guide

Brother 5750e User Manual

Brother HL-5250DN User's Guide

Brother HL-5050 Network User's Guide

Brother 3550 User Manual

Brother LX-900 User Manual

Brother BCL-D20 User Manual

Brother FAX 1920CN User Manual

Brother 1435 User Manual

Brother SE-270D Quick Reference Guide

Brother HL-3450CN Command Reference Guide for Software Developers

Brother XR-52C User's Guide

Brother 4750e User Manual

Brother HL-5280DW Quick Setup Guide

Brother PT-300 User Manual

Brother SM1704 Specification

Brother PT-9800PCN ESC/ P Command Reference

Brother 600 User Manual

Brother 2430PC User Manual

Brother hl-1270n Command Reference Guide for Software Developers

Brother BM-2700 User's Guide

Brother DCP-8045D Quick Setup Guide

Brother MFC-J880DW Open Source Licensing Remarks

Brother PT-7500 User's Guide

Brother PT-2700 Quick Setup Guide

Brother 2480C User Manual

Brother BE-1201B-AC-PC User Manual

Brother PT-2400 User's Guide

Brother MFC-J6520DW Open Source Licensing Remarks

Brother HL-1670N Quick Setup Guide

Brother HL-5040 Network User's Guide

Brother PT-2030AD User's Guide

Brother MFC-8440 Network User's Guide

Brother QL-570VM Quick Reference Guide

Brother 1200 User Manual

Brother PT-320 User Manual

Brother HL-L8350CDW Open Source Licensing Remarks

Brother MFC-5490CN User's Guide

Brother MFC-3820CN Network User's Guide

Brother LN7424001 User Manual

Brother HL-2150N User Manual

Brother MFC-8870DW User Manual

Brother HL-2070N User's Guide

Brother DCP-7040 User's Guide

Brother DK1204 User Manual

Brother LS 30 User's Guide

Brother HL-5070N User Manual

Brother PED Basic Instruction Manual

Brother SE-350 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother DCP-7040 Quick Setup Guide

Brother DZ2400 Notification about included accessories

Brother MFC-4420C User's Guide

Brother MFC-665CW Quick Setup Guide

Brother MFC-8840DN User's Guide

Brother QL-1050N User's Guide

Brother HL-L2305W Open Source Licensing Remarks

Brother CS-8060 User's Guide

Brother SE-270D User's Guide

Brother HL-2220 Command Reference Guide for Software Developers

Brother NX570Q Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother HL-5140 Quick Setup Guide

Brother 2030 User Manual

Brother 2040 User Manual

Brother 1060 User Manual

Brother MFC-7225N User's Guide

Brother MFC-J6920DW Open Source Licensing Remarks

Brother MFC-5840CN Quick Setup Guide

Brother MFC-J6720DW Open Source Licensing Remarks

Brother LS-590 User's Guide

Brother HL-4040CN User Manual

Brother DCP-145C User Manual

Brother LW1704001 User Manual

Brother 8440 User Manual

Brother PT-2730 User Manual

Brother QL-1060N User's Guide

Brother QL-600 Raster Command Reference

Brother MFC-620CN Quick Setup Guide

Brother HL-1850 Command Reference Guide for Software Developers

Brother DK1241 User Manual

Brother HL-2700CN User's Guide

Brother HL-2700CN Network User's Guide

Brother DCP-8040 User's Guide

Brother SM2700 Notification about built-in utility stitches, features and included accessories

Brother QL-550 User's Guide

Brother XR-7700 Quick Start Guide

Brother MFC-7220 User's Guide

Brother DK1203 User Manual

Brother BES-916 User Manual

Brother MFC-440CN Network User's Guide

Brother MFC-5460CN User's Guide

Brother SM1400 Specification

Brother MFC-3240C User's Guide

Brother HL-2170W Network User's Guide

Brother DCP8040 User Manual

Brother DCP-8020 Network User's Guide

Brother MFC-5440CN Quick Setup Guide

Brother HL-5030 Quick Setup Guide

Brother HL-L2320D Open Source Licensing Remarks

Brother SV-100B User Manual

Brother PT-1400 Quick Reference Guide

Brother FAX-2480C User's Guide

Brother DCP 8060 User's Guide

Brother PE-DESIGN 7 User Manual

Brother MFC-210C User's Guide

Brother MFC-3360C Quick Setup Guide

Brother HL-2230 Command Reference Guide for Software Developers

Brother QL-570 User's Guide

Brother PT-P750W Open Source Licensing Remarks

Brother DK1218 User Manual

Brother MFC-5860CN Network User's Guide

Brother HL-5050 User's Guide

Brother MFC-J285DW Open Source Licensing Remarks

Brother MFC-7820N Network User's Guide

Brother JX2517 Quick Reference Guide

Brother MFC-L2740DW Open Source Licensing Remarks

Brother 1 User Manual

Brother SE1900 Warranty

Brother QL-1050 Quick Start Guide

Brother QL-500 User's Guide

Brother HL-5170DN Network User's Guide

Brother CP100X Warranty

Brother HL-L8350CDWT Open Source Licensing Remarks

Brother PT-70 User's Guide

Brother HL-4040CN Command Reference Guide for Software Developers

Brother MFC-685CW Quick Setup Guide

Brother MFC J430w Open Source Licensing Remarks

Brother HL-5440D Open Source Licensing Remarks

Brother QL-650TD User's Guide

Brother MFC-440CN User's Guide

Brother FAX-1940CN User's Guide

Brother FAX 1840C Quick Setup Guide

Brother DVR-N4 User Manual

Brother FAX-2920 User's Guide

Brother Fax 1360 User Manual

Brother SDX125E Instructions / Assembly

Brother PT-2110 User's Guide

Brother MFC-J460DW Open Source Licensing Remarks

Brother MFC-J5520DW Open Source Licensing Remarks

Brother 750 User Manual

Brother MFC-J470DW Open Source Licensing Remarks

Brother CS7000i Warranty

Brother 515 User Manual

Brother PT-2430PC User's Guide

Brother MFC-8840D Network User's Guide

Brother FAX-2900 Quick Setup Guide

Brother PT-1180 User's Guide

Brother MFC-7440N Network User's Guide

Brother NC6100H User Manual

Brother HL-1470N Command Reference Guide for Software Developers

Brother HL-4050CDN User Manual

Brother SM1704 Use and Care Manual

Brother HL-7050 Network User's Guide

Brother MFC-8420 Network User's Guide

Brother LX-1200 User Manual

Brother HL-1870N Command Reference Guide for Software Developers

Brother DK1207 User Manual

Brother MFC-8670DN User's Guide

Brother DCP-8065DN Quick Setup Guide

Brother PT-1800 User's Guide

Brother MFC-3320CN Network User's Guide

Brother CP-6500 Quick Reference Guide

Brother LN7808001 User Manual

Brother 1840C User Manual

Brother SM3701 Warranty

Brother MFC-885CW Quick Setup Guide

Brother ST4031HD Warranty

Brother MFC-3820CN User's Guide

Brother DCP-350C Quick Setup Guide

Brother MFC-7420 User's Guide

Brother CS-80 User's Guide

Brother MFC-8640D User's Guide

Brother LS-1520 User's Guide

Brother 1830 User Manual

Brother MFC-440CN Quick Setup Guide

Brother HL-6050DN User's Guide

Brother HL-2270DW Command Reference Guide for Software Developers

Brother HL-2070N Quick Setup Guide

Brother HL-5130 User Manual

Brother MFC-J5620DW Open Source Licensing Remarks

Brother PT-80 User Manual

Brother PT-1500PC User Manual

Brother NX-600 Quick Reference Guide

Brother CS7000i Notification about included accessories

Brother 1575MC User Manual

Brother DCP-165C Quick Setup Guide

Brother DK1208 User Manual

Brother MFC-420CN Network User's Guide

Brother HL-5150D User's Guide

Brother MFC-3340CN Network User's Guide

Brother HL-2600CN User's Guide

Brother 2300 User Manual

Brother HL-2700CN Quick Setup Guide

Brother DCP7025 User Manual

Brother DCP-7030 Quick Setup Guide

Brother MFC-845CW Network User's Guide

Brother MFC-8840DN Quick Setup Guide

Brother HL-5050 Quick Setup Guide

Brother MFC-8840DN Network User's Guide

Brother PT-9500PC Software Installation Guide

Brother MFC-J870DW Open Source Licensing Remarks

Brother DK1201 User Manual

Brother QL-580N User's Guide

Brother HL-5040 User Manual

Brother MFC-L9550CDW Open Source Licensing Remarks

Brother PT-1810 User's Guide

Brother HL-L2340DW Open Source Licensing Remarks

Brother HL-1850 User's Guide

Brother DCP-L2520DW Open Source Licensing Remarks

Brother DCP-9045CDN User Manual

Brother HL-7050 Command Reference Guide for Software Developers

Brother 1880 User Manual

Brother 660MC User Manual

Brother FAX-1960C User's Guide

Brother PT-1750 User's Guide

Brother PT-1500PC Quick Reference Guide

Brother MFC-465CN User's Guide

Brother MFC-8710DW Open Source Licensing Remarks

Brother MFC-5840CN User Manual

Brother HL-5280DW Network User's Guide

Brother 600 User Manual

Brother PT-2700 Software Installation Guide

Brother HL-7050N Network User's Guide

Brother MFC-820CW Network User's Guide

Brother 1820C User Manual

Brother PR 1000 Operation Manual for Premium Pack I (Optional accessories)

Brother HL-5250DN Network User's Guide

Brother HL-5150D User Manual

Brother MFC-7345N User's Guide

Brother 8840D User Manual

Brother MFC-8810DW Open Source Licensing Remarks

Brother 855-X06 User Manual

Brother MFC-J4410DW Open Source Licensing Remarks

Brother CS7000i Replacement Part List

Brother HL-5470DWT Open Source Licensing Remarks

Brother NX-600 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother 285 User Manual

Brother MFC-9070 User Manual

Brother 3.1 User Manual

Brother 7010 User Manual

Brother SM1704 Replacement Part List

Brother HL-5340D Command Reference Guide for Software Developers

Brother 3034D User Manual

Brother ML100 User Manual

Brother HL-5240 Quick Setup Guide

Brother NC9100H User Manual

Brother MFC-5460CN Network User's Guide

Brother GT541 User Manual

Brother DK1221 User Manual

Brother HL-5150DN User Manual

Brother PT-1600 User Manual

Brother MFC-665CW Network User's Guide

Brother PC-6500 User's Guide

Brother QL-1050N Quick Start Guide

Brother PT-9500PC Quick Reference Guide

Brother HL-2140 User's Guide

Brother 4000D User Manual

Brother MFC-8640D Network User's Guide

Brother MFC-8440 User Manual

Brother 8045D User Manual

Brother HL-4040CDN Network User's Guide

Brother HL-5140 Command Reference Guide for Software Developers

Brother MFC-J480DW Open Source Licensing Remarks

Brother PT-9600 User's Guide

Brother HL-3450CN User's Guide

Brother HL-6050DN Command Reference Guide for Software Developers

Brother MFC-J485DW Open Source Licensing Remarks

Brother HL-4040CDN Quick Setup Guide

Brother 2400 User Manual

Brother PT-2710 Quick Setup Guide

Brother 7030 User Manual

Brother SM1400 Replacement Part List

Brother MFC-240C User's Guide

Brother HL-5250DN Command Reference Guide for Software Developers

Brother PT-7600 User's Guide

Brother BE-0901E-AC-PC User Manual

Brother MFC-7225N Quick Setup Guide

Brother DCP-8150DN Open Source Licensing Remarks

Brother ST371HD Warranty

Brother HL-2170W User's Guide

Brother HL-5030 User's Guide

Brother HL-4070CDW Quick Setup Guide

Brother 7840W User Manual

Brother MFC-620CN User's Guide

Brother 1000 User Manual

Brother MFC-8660DN Quick Setup Guide

Brother HL-2070N Network User's Guide

Brother 2460 User Manual

Brother PT-2730 Software Installation Guide

Brother MFC-420CN User's Guide

Brother DCP 8060 Quick Setup Guide

Brother HL-2140 Command Reference Guide for Software Developers

Brother HL-1670N Command Reference Guide for Software Developers

Brother XR9550 Warranty

Brother MFC-7840W Network User's Guide

Brother HL-2460 Command Reference Guide for Software Developers

Brother CS5055 Warranty

Brother TD-4000 Additional Operation Guide (Connecting a Barcode Scanner)

Brother DCP-8040 User Manual

Brother DK1209 User Manual

Brother 2340CV Warranty

Brother PT-2730 User's Guide

Brother NX-650Q Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother HL-1650 Quick Setup Guide

Brother 4100 User Manual

Brother EM-630 User Manual

Brother MFC-465CN Network User's Guide

Brother 560 User Manual

Brother HL-4040CN User's Guide

Brother MFC-5440CN User Manual

Brother HL-7050N Command Reference Guide for Software Developers

Brother HL-5050 User Manual

Brother MFC-410CN User Manual

Brother HL 2040 Quick Setup Guide

Brother PT 2100 Software Installation Guide

Brother MFC-L2700DW Open Source Licensing Remarks

Brother FAX-2440C Quick Setup Guide

Brother BM-2700 Quick Start Guide

Brother BM-3600 User's Guide

Brother MFC-660CN User Manual

Brother DCP-130C Quick Setup Guide

Brother 7500 User Manual

Brother DCP-8155DN Open Source Licensing Remarks

Brother MFC-8820D Network User's Guide

Brother 885-U22 User Manual

Brother pt300 User Manual

Brother 540 User Manual

Brother HL-7050N User's Guide

Brother HL-5070N Network User's Guide

Brother HL-5040 Command Reference Guide for Software Developers

Brother 285C User Manual

Brother MFC-4420C Quick Setup Guide

Brother CS-8072 User's Guide

Brother 3800 User Manual

Brother FAX-1820C User's Guide

Brother DCP-8065DN User's Guide

Brother MFC-3240C Quick Setup Guide

Brother MFC-845CW User's Guide

Brother 1960C User Manual