Press - Page 353

ERROR MESSAGES

Append

ix

339

8

This message appears when 
the built-in camera is being 
used to align the embroidery 
position, but the embroidery 
positioning sticker is too near 
an edge or the pattern 
extends from the embroidery 
frame. Change the 
positioning of the embroidery 
position sticker, and then try 
aligning the position again. 
See page 206 or 302.

This message is displayed 
when the upper thread is 
broken or not threaded 
correctly, and the “Start/Stop” 
button or the “Reverse/ 
Reinforcement Stitch” button 
is pressed. 

This message is displayed 
when the “Presser Foot Lifter” 
button is pushed while the 
presser foot lever is raised/
the needle is lowered.

This message is displayed 
when the “Start/Stop” button 
is pushed to sew Utility 
stitches or Character/
Decorative stitches while the 
foot controller is connected. 
(This message does not 
appear when embroidering).

This message is displayed 
when the “Start/ Stop” button 
is pushed while the machine 
is in embroidery edit mode 
and a pattern is being edited. 

This message is displayed 
when there is no stitch or 
embroidery pattern selected 
and the “Start/Stop” button or 
the “Reverse/Reinforcement 
Stitch” button is pressed. 

This message is displayed 
when the bobbin thread is 
running out. 

This message is displayed 
when the memory is full and 
the stitch or pattern cannot be 
saved. 

This message is displayed 
when the machine is 
retrieving a previously saved 
pattern while in embroidery 
edit mode. 

This message is displayed 
when, after selecting a 

pattern, , 

, or 

 is 

pressed and the pattern is 
about to be deleted.