Using the Spool Stand; Attach the spool stand to the machine. (see ; Place the spool of thread on the spool pin - Page 66

UPPER THREADING

52

Using the Spool Stand

The included spool stand is useful when using 
thread on spools with a large diameter (cross-
wound thread). This spool stand can hold two 
spools of thread.

■

Using the Spool Stand

• Be sure to use a spool cap that is slightly larger 

than the spool.
If the spool cap that is used is smaller or much 
larger than the spool, the thread may catch and 
sewing performance may suffer.

• When using thread on a thin spool, place the 

included spool felt on the spool pin, place the 
thread spool on the spool pin so that the center 
of the spool is aligned with the hole at the center 
of the spool felt, and then insert the spool cap 
onto the spool pin.

a

Spool felt

• When using thread on a cone spool, use the 

spool holder.

a

Spool holder

• Depending on the size of spool or the amount of 

thread remaining, choose the appropriate sized 
spool cap (large or medium). Spool cap (small) 
cannot be used with the spool cap base.

a

Spool cap

b

Spool cap base

a

Attach the spool stand to the machine. (see 
page 9.)

b

Place the spool of thread on the spool pin 
so that the thread feeds off the spool 
clockwise. Firmly insert the spool cap onto 
the spool pin.

Memo

• See page 9 to assemble the spool stand.

• See page 41 to wind the bobbin when using 

the spool stand.