Pass the thread through the hole in the right ; of the thread guide toward the back of the ; Wind the thread clockwise around the - Page 245

Using the Optional Bobbin Winder

 243

7

—————————————————————————————————————————————————————————————————————————————————————

5

Pass the thread through the hole in the right 
of the thread guide toward the back of the 
machine.

1

Hole in the thread guide

6

Wind the thread clockwise around the 
bobbin 4 or 5 times, as shown in the 
illustration.

7

Pass the end of the thread through the guide 
slit in the bobbin winder seat, and pull the 
thread. The cutter will cut the thread.

1

Guide slit

2

Bobbin winder seat

Note

●

Be sure to follow the procedure described. 
If the bobbin is wound without the thread 
being cut with the cutter, when the bobbin 
thread runs low, the thread may become 
tangled around the bobbin and cause the 
needle to break.

8

Slide the bobbin holder, until it clicks into 
place.

1

Bobbin holder

9

Press the main power switch to start winding 
the bobbin.

X

Start winding the bobbin.