The thread trimming button was ; pressed before the machine was ; The machine needs maintenance. (Refer to page 251.)- Page 266

APPENDIX 

————————————————————————————————————————————————————————————————————————————

264

The thread trimming button was 

pressed before the machine was 

unlocked.

Touch 

 to use the thread 

trimming function.

The machine needs maintenance. (Refer to page 251.)

The machine is retrieving a 

previously saved pattern.

The machine was stopped while 

the needle bar case was moving.

Touch 

 to automatically 

reset the needle bar case.

The combined character pattern is 

too large for the embroidery 

frame.

Rotate the pattern 90 degrees and 

then continue combining 

characters.

The combined character pattern is 

too large to fit in the extra-large 

embroidery frame.

Change the character pattern 

combination.

The motor has locked up due to 

tangled thread or for other reasons 

related to thread delivery.

If the thread is entangled in the 

bobbin case, clean the race, and 

then oil it. (Refer to page 247 and 

251.)

The USB media is write-protected.

Cancel the write protection.