While holding the needle in place with your ; left hand, tighten the needle set screw.; Be sure to insert the needle all the way - Page 89

Changing the Needle

 87

3

—————————————————————————————————————————————————————————————————————————————————————

Hold the needle changing tool and press the 
end of the needle changing tool 

1

 in to 

extend the needle-mounting clamp 

2

. Attach 

the clamp to the needle, and then release the 
pressed area to clamp the needle. To 
unclamp the needle, press 

1

 again.

1

End of the needle changing tool

2

Needle mounting clamp

4

While holding the needle in place with your 
left hand, tighten the needle set screw.

Use the Allen screw driver to turn the needle 
set screw clockwise.

CAUTION

●

Be sure to insert the needle all the way 
up until it touches the needle bar 
stopper and securely tighten the needle 
set screw with the Allen screw driver, 
otherwise the needle may break or the 
machine may be damaged.

●

If the needle is not fully inserted, the 
hook of the automatic needle-threading 
mechanism will not pass through the 
eye of the needle during automatic 
needle threading, and the hook may 
bend or the needle cannot be threaded.

●

If the hook of the automatic needle-
threading mechanism is bent or 
damaged, contact your authorized 
dealer.