While lightly holding down the bobbin with ; your right hand as shown, guide the thread ; through the slit (- Page 29

Winding/Installing the Bobbin    

 23

1

7

While lightly holding down the bobbin with 
your right hand as shown, guide the thread 
through the slit (

1

 and 

2

).

• At this time, check that the bobbin easily 

rotates counterclockwise.

Then, pull the thread toward you to cut it with 
the cutter (

3

).

1

Slit

2

Cutter (Cut the thread with the cutter.)

8

Reattach the bobbin cover.

Insert the tab in the lower-left corner of the 
bobbin cover, and then lightly press down on 
the right side.

X

The lower threading is finished.

Next, thread the upper thread. Continue with 
the procedure in “Upper Threading” (on the 
next page).

Memo

●

You can begin sewing without pulling up 
the bobbin thread. If you wish to pull up the 
bobbin thread before starting to sew, pull 
up the thread according to the procedure in 
“Pulling up the bobbin thread” (page 31).

2

1