Needle and presser foot ; Thread guide discs; Needle bar thread hook- Page 4

——————————————————————————————————————— Names of Machine Parts and Their Functions

Cover C

Needle and presser foot 
section

1

Buttonhole lever

Lower the buttonhole lever when sewing buttonholes 
and bar tacks.

2

Thread guide discs

Pass the thread through the thread guide discs when 
using the needle threader to thread the needle.

3

Needle bar thread hook

Pass the upper thread through the needle bar thread 
hook.

4

Needle plate

The needle plate is marked with guides for sewing 
straight seams.

5

Bobbin cover/shuttle

Remove the bobbin cover, and then insert the bobbin 
into the shuttle.

6

Feed dogs

The feed dogs feed the fabric in the sewing direction.

7

Presser foot

The presser foot applies pressure consistently on the 
fabric as the sewing takes place. Attach the appropriate 
presser foot for the selected stitching.

8

Presser foot holder

The presser foot is installed onto the presser foot holder.

Right-side/rear view

1

Presser foot dial

Use the presser foot dial to adjust the amount of 
pressure that the presser foot applies to the fabric.

2

Handle

Carry the sewing machine by its handle when 
transporting the machine.

3

Balance wheel

Turn the balance wheel toward you to raise and lower 
the needle to sew one stitch.

4

Air vent

The air vent allows the air surrounding the motor to be 
exchanged. Do not cover the air vent while the sewing 
machine is being used.

5

Main power switch

Use the main power switch to turn the sewing machine 
on and off.

6

Foot controller jack

Insert the plug on the end of the foot controller cable 
into the foot controller jack.

7

Power supply jack

Insert the plug on the power supply cord into the power 
supply jack.

8

Feed dog position switch

Use the feed dog position switch to lower the feed dogs.

Memo

●

Refer to Cover B, D or E pages while you 
are learning to use your machine.

1

2

3

4

5

6

7

8

2

3

5

6

4

7

8

1