Press the black button at the back of the ; presser foot holder.; Place a different presser foot below the holder - Page 44

GETTING READY 

———————————————————————————————————————————————————

38

4

Press the black button at the back of the 
presser foot holder.

1

Black button 

2

Presser foot holder

X

The presser foot holder releases the presser 
foot.

5

Place a different presser foot below the holder 
so that the presser foot pin is aligned with the 
notch in the holder.

Position the presser foot so the letter indicating 
the presser foot type (A, G, I, J, M, N or R) is 
positioned to be read.

1

Presser foot holder

2

Notch

3

Pin

6

Slowly lower the presser foot lever so that the 
presser foot pin snaps into the notch in the 
presser foot holder.

1

Presser foot lever

X

The presser foot is attached.

7

Raise the presser foot lever to check that the 
presser foot is securely attached.

Note

●

When a stitch is selected, the icon for the 
presser foot that should be used appears in 
the screen. Check that the correct presser 
foot is attached before starting to sew. If the 
wrong presser foot is installed, turn off the 
sewing machine, attach the correct presser 
foot, and then select the desired stitch 
again.

Buttonhole foot “A”

Overcasting foot “G”

Zigzag foot “J”

Button fitting foot “M”

Monogramming foot “N”

Blind stitch foot “R”

Side cutter “S”

●

For details on the presser foot that should be 
used with the selected stitch, refer to “Stitch 
Settings” (page 128).

1

2

1

2

3

1