Cutting the thread; Using the thread cutter button; When you wish to finish the stitching, press - Page 59

Sewing    

53

2

Cutting the thread

When you have finished sewing, cut the threads. The 
threads can be cut in either of two ways.

■

Using the thread cutter button

1

When you wish to finish the stitching, press 

 (thread cutter button) once.

1

Thread cutter button

X

The threads are cut and the needle is raised.

2

Raise the presser foot lever.

1

Presser foot lever

Note

●

Do not press the thread cutter button if there 
is no fabric under the presser foot or while 
the machine is sewing, otherwise damage to 
the machine may occur.

Memo

●

The machine can be set so that the threads 
will be cut when sewing is finished. For 
details on setting the machine so that the 
threads are cut automatically, refer to 
“Automatically cutting the thread” 
(page 59).

■

Using the manual thread cutter

When sewing with nylon or metallic threads, or 
other special threads, use the thread cutter on the 
side of the machine to cut the threads.

1

When you wish to finish the stitching and the 
sewing machine is stopped, press 

(needle position button) once to raise the 
needle.

1

Needle position button

X

The needle is raised.

2

Raise the presser foot lever.

1

Presser foot lever

3

Pull the fabric to the left side of the machine, 
and then pass the threads through the thread 
cutter to cut them.

1

Thread cutter

●

Do not press the thread cutter button 
after the threads have already been cut, 
otherwise the needle may break, the 
threads may become tangled or damage 
to the machine may occur.

1

1

CAUTION

1

1

1