3-4. Data read/write mode; 3-4. Data read/write mode ; Turn on the power switch. - Page 32

3. READING / WRITING DATA 

25

BAS-311G, BAS-326G 

3-4. Data read/write mode 

1 

With the power turned off, insert the CF card into the CF 
slot. 

NOTE: 

•

  Make sure the CF card is facing the correct way. 

•

 Always be sure to keep the cover closed except 

when inserting and removing the CF card. If this is 
not done, dust may get inside and cause problems 
with operation. 

•

  If no valid data can be found, the CF media indicator 

will not illuminate. 

2 

Turn on the power switch. 

3 

Switch to data read/write mode.

TEST indicator and CF media indicator illuminate

While pressing the TEST key, press the R/W key. 
 

•

  The mode number will appear in the PROGRAM No. 

display, and the setting details for that mode will 
appear in the menu display. 

•

  The initial mode is sewing data reading mode. (Refer 

to the read/write mode list) 

4 

Press the   or    key to select the mode. 

[Read/write mode list] 

PROGRAM No. 

display

Menu display

Setting items

r 1 

[-SEd] 

Sewing data is read from the CF card. (*1)

w 2 

[SEd-] 

Sewing data is written to the CF card.

r 3 

[-MEM] 

Memory switch settings are read from the CF card.

w 4 

[MEM-] 

Memory switch settings are written to the CF card.

r 5 

[-UPG] 

User programs are read from the CF card.

w 6 

[UPG-] 

User programs are written to the CF card.

r 7 

[-SyS] 

Control programs are read from the CF card and used to update the firmware version.

w 8 

[LoG-] 

Error log data is written to the CF card.

r 9 

[-Fdd] 

Sewing data is read from the floppy disk. (*2) (*3)

w 10 

[Fdd-] 

Sewing data is written to the floppy disk. (*2)

r 11 

[-EoP] 

Extended option output (*4) data is read from the CF card.

w 12 

[EoP-] 

Extended option output data is written to the CF card.

r 13 

[oPFd] 

Extended option output data is read from the floppy disk. (*2)

*1  The sewing data that can be use with this sewing machine is data that has been created for the BAS-311G/BAS-326G. 
*2  Only valid when using an optional floppy disk drive. 
*3  Sewing data for the BAS-300 series, BAS-300A series and BAS-300E/F series can be read. 
*4  Refer to the instruction manual for the programmer for details on extended option output. 

4453Q

4574Q

4575Q