5. Correct operation; 5-1. Installing the needle; 5-2. Upper threading- Page 16

9

BAS-761

5. Correct operation

5. Correct operation

5-1. Installing the needle

Fully insert needle 

q

, with its long groove to the left,

and secure it with screw 

w

.

Note:

If the angle is incorrect, the needle an rotary hook
will lock when the needle bar is at its lowest posi-
tion, so make sure that the needle and rotary hook
do not lock.

5-2. Upper threading

1.

Apply air pressure and turn on power switch.

2.

Press the FOLDER RESET button 

!9

 to move the machine head back to the home position.

3.

Press FOOT button 

!1

 and lower presser foot 

w

.

4.

Pass the upper thread as illustrated below. After threading, be sure to press FOOT button 

!1

 and lift presser foot 

w

.

5.

After threading, turn the pulley and lift the needle-bar to the uppermost position.

q

w

!9

!1

w

50mm

Leave about 50 mm of
thread end with the
thread take-up at its
highest position.

■

 x2.4 rotary hook

■

 x2.4 rotary hook

10

9

10

9

11

13

14

■

 x1.7 rotary hook

11

9

10

1

2

3

5

6

7

8

9

12

13

14

15

16

10

4

11

7

6

■

 x1.7 rotary hook

N/thread
cooler assy