7. Measures against Thread Breakage; 7-1 Remedies- Page 190
Brother BE-0901E-AC-PC User Manual
Table of Contents
7-8
BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 7 Operation of Machine
7. Measures against Thread Breakage
7-1 Remedies
W1610
1. If embroidering is suspended due to thread breakage, “E-0A” is displayed while blinking on the
operation panel.
2. Correct the broken thread and pass it through again.
Refer to "Chapter 2, 3-1 Upper Threading" (
→
Page 2-12) for details.
3. Press the
switch in order to reset the alarm of thread breakage.
4. Return the hoop to a position where thread breakage occurred by pressing the STEP BACK
switch.
W1271Q
When the switch is pressed, the machine continues operation without holding the switch. To stop the
machine, press the switch to the opposite side or press the
switch.
5. Press the
switch to resume operation.
Detailed Information for Brother BE-0901E-AC-PC User Manual
Lists of information found in Brother BE-0901E-AC-PC User Manual - Page 190
- 7. Measures against Thread Breakage 7-1 Remedies W1610 1.
- 2. Correct the broken thread and pass it through again.
- 3. Press the switch in order to reset the alarm of thread breakage.
- 4. Return the hoop to a position where thread breakage occurred by pressing the STEP BACK switch.
- 5. Press the switch to resume operation.
- BE-1201B-AC-PC Chapter 7 Operation of Machine 7.
Related Documents for Brother BE-0901E-AC-PC User Manual
All trademarks are property of their respective owners. Tightrope
Interactive