3. Adjustment of Presser Foot Height- Page 225

BE-0901E-AC-PC• BE-1201B-AC-PC

10-7

Chapter 10 Adjustment

3. Adjustment of Presser Foot Height

W1627

W1628

W1629

1. Turn the power switch off.

2. Select the needle bar No. 1.

3. Loosen the screw [2] of the presser foot [1], and adjust the presser foot [1] until it comes above the

cloth top surface when it is at the alignment position (where the pulley B indication mark " " and
the cover indication mark " " are aligned).

Note) When the presser feet have been adjusted in height, check that each needle lowers to the center of

the presser foot hole.

4. Turn on the power switch and lower presser foot [1] with the lever.

[1]

[2]

material