BE-0901E-AC-PC• BE-1201B-AC-PC- Page 231

BE-0901E-AC-PC• BE-1201B-AC-PC

11-3

Chapter 11 Error code list

Code

Error

Measures

E-21

Hoop overhang (+X) 

E-22

Hoop overhang (+Y) 

E-23

Hoop overhang (+X, +Y) 

E-24

Hoop overhang (-X) 

E-25

Hoop overhang (+X, -X) 

E-26

Hoop overhang (-X, +Y) 

E-27

Hoop overhang (+X, -X, +Y) 

E-28

Hoop overhang (-Y) 

E-29

Hoop overhang (+X, -Y) 

E-2A

Hoop overhang (+Y, -Y) 

E-2B

Hoop overhang (+X, +Y, -Y) 

E-2C

Hoop overhang (-X, -Y) 

E-2D

Hoop overhang (+X, -X, -Y) 

E-2E

Hoop overhang (-X, +Y, -Y) 

E-2F

Hoop overhang (+X, -X, +Y, -Y) 

E-31

Needle overhang (+X) 

E-32

Needle overhang (+Y) 

E-33

Needle overhang (+X, +Y) 

E-34

Needle overhang (-X) 

E-36

Needle overhang (-X, +Y) 

E-38

Needle overhang (-Y) 

E-39

Needle overhang (+X, -Y) 

E-3C

Needle overhang (-X, -Y) 

Pattern or the needle position is out of the embroidering area.
Reset the embroidering area on the panel or move the hoop to
the sewable position.

E-41

Invalid start-up error

Turn the power off and on once.

E-42

XY movement error

Press the 

.

E-43

Slave I/F EEPROM read error

Turn the power off and on once. If the same error occurs again,
the main PC is faulty.

E-A1

Spindle motor lock

Press the 

 If it occurs frequently, the main shaft

mechanism is faulty.

E-A5

Spindle motor CPU error

E-A6

Main shaft motor CPU communication
command error

E-A7

Main shaft motor CPU send/receive error

This is not usually displayed.

E-A8

Main shaft stop position signal error

Adjust the pulley stop position (100 degrees) above the needle

and press the 

 If the error occurs frequently, the parts

related to the main shaft stop position sensor are faulty.

E-A9

Spindle CPU parameter error

This is not usually displayed.

E-C1

Area over during embroidering

Set the embroidering area again on the panel.

E-C2

Wiper out error

If the wiper is tangled with a thread, remove it. Press the 

.

E-C3

Embroidering data buffer empty

E-C9

Embroidering start error

E-CA

No sewing permisson

This is not usually displayed.