Pull out some thread, and then thread the ; thread guide for bobbin winding. ; While using your left hand to hold the end of - Page 20

GETTING READY 

————————————————————————————————————————————————————————

14

Memo

●

When using thread that winds off quickly, 
such as transparent nylon thread or metallic 
thread, place the enclosed spool net over 
the spool before placing the spool of thread 
onto the spool pin.
If the spool net is too long, fold it to fit the 
size of the spool.

1

Spool net

2

Spool

3

Spool pin

4

Spool cap

8

Pull out some thread, and then thread the 
thread guide for bobbin winding. 

Hold the thread with both hands, and then 
securely pass the thread as far as possible into 
the two slits in the thread guide.

1

Thread guide for bobbin winding

2

Two slits

9

While using your left hand to hold the end of 
the thread that wraps around the thread guide 
for bobbin winding, use your right hand to 
wind the free end of the thread clockwise 
around the bobbin five or six times.

0

Pull the thread to the right and pass it through 
the slit in the bobbin winder seat.

1

Slit in bobbin winder seat (with built-in cutter)

X

The thread is cut to a suitable length.

1

2

3

4

1

2

●

Be sure to cut the thread as described. If 
the bobbin is wound without cutting the 
thread using the cutter built into the slit 
in the bobbin winder seat, the thread 
may become tangled in the bobbin or the 
needle may bend or break when the 
bobbin thread starts to run out.

1

CAUTION

S2_brotherE.book  Page 14  Thursday, February 13, 2003  11:03 AM