Pull the thread under the disc at the front in ; the lower-left corner and around to the right, ; and then cut the thread with the cutter.- Page 28

GETTING READY 

————————————————————————————————————————————————————————

22

c

Pull the thread under the disc at the front in 
the lower-left corner and around to the right, 
and then cut the thread with the cutter.

Follow arrow 6 indicated on the thread 
cassette.

1

Disc

2

Cutter

X

The spool of thread is now loaded in the 
thread cassette.

Note

●

Be sure to cut the thread as described 
above, otherwise the needle threader 
cannot be used to thread the needle.

Threading the needle

In this section, the procedures for installing the 
thread cassette and threading the needle are 
described. The needle threader is used to thread the 
needle at the same time that the thread cassette is 
inserted.

Memo

●

The needle threader can be used with 
sewing machine needles 75/11 through 
100/16.

●

Thread with a thickness of 130/20 or less 
cannot be used with the needle threader.

●

The needle threader cannot be used with 
the wing needle or the twin needle.

●

If the needle threader cannot be used, refer 
to “ Threading the needle manually”  
(page 25).

1

Check that the thread cassette indicator is lit 
up in green.

1

Thread cassette indicator

If the thread cassette indicator is lit up in red, 
the needle has not been raised to the correct 

position. Press 

(needle position button) 

once to raise the needle.

1

Needle position button

1

2

1

1

S2_brotherE.book  Page 22  Thursday, February 13, 2003  11:03 AM