Thread the thread cassette with the thread ; from the spool on the extra spool pin.; Insert the thread cassette (with the extra spool - Page 31

Upper Threading    

 25

1

4

Thread the thread cassette with the thread 
from the spool on the extra spool pin.

• For more details, refer to “ Loading the spool 

into the thread cassette”  (page 19).

5

Insert the thread cassette (with the extra spool 
pin attached) into the thread cassette 
compartment.

Use both hands to press down on both sides of 
the extra spool pin.

X

At the same time that the thread cassette is 
inserted, the needle is threaded.

X

The extra spool pin is now installed.

Thread the needle manually 
(without using the needle threader)

When using special thread, thread with a thickness 
of 130/20 or less, the wing needle or the twin needle 
which cannot be used with the needle threader, 
thread the needle as described below.

1

Remove the needle.

• Refer to “ Replacing the needle”  (page 32).
• When using the wing needle, the twin 

needle or thread that cannot be used with 
the needle threader, be sure to remove the 
needle, otherwise the machine may be 
damaged.

2

Check that the thread cassette indicator is lit 
up in green, and then insert the thread cassette 
into the thread cassette compartment.

• For details, refer to 

1

 through 

2

(page 22).

X

Pass the thread through the needle bar 
thread hook.

1

Needle bar thread hook

3

Install a needle.

• Refer to “ Replacing the needle”  (page 32).

4

Pass the thread through the eye of the needle 
from front to back.

1

S2_brotherE.book  Page 25  Thursday, February 13, 2003  11:03 AM