SEWING BASICS - Page 62

Brother CS-8060 User's Guide

User's Guide

2014 Dodge Charger SRT Owner Manual

Enclosed Accessories

Names of Machine Parts and Their Functions

Needle and presser foot

Thread cassette indicator

Stitch indicator /

Optional Accessories

Sewing Machine Features

Enclosed Accessories ................................................................................................ Cover A

Sewing ............................................................................................................................... 42

Stitch Settings ....................................................................................................................96

Important Safety Instructions

FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY

For safe operation

Upper Threading ....................................................................................................18

Turning the Machine On/Off

Turning on the machine

Winding/Installing the Bobbin

Slide the bobbin winder shaft to the right.

Pull out some thread, and then thread the

Press

Installing the bobbin

Reattach the bobbin cover.

Upper Threading

Loading the spool into the

Push the thread cassette eject lever on the left

While holding the end of the thread with your

Pull the thread under the disc at the front in

Insert the thread cassette into the thread

Close the thread cassette compartment cover.

Thread the thread cassette with the thread

Using the twin needle

Insert the thread cassette (with the extra spool

Do not try turning the fabric with the

Pulling up the bobbin thread

Medium

Checking the needle

While holding the needle with your left hand,

Lower the needle-changing tool.

Press the black button at the back of the

Removing the presser foot

Raise the presser foot lever.

Sewing Cylindrical Pieces

Sewing ....................................................................................................................42

While the machine is in operation, pay special attention to the needle location. In addition,

General sewing procedure

Turn on the sewing machine.

Cutting the thread

Adjusting the Thread Tension

Adjusting the Stitch Width and Length

Adjusting the stitch length

Selecting Stitching ..................................................................................................58

Selecting Stitching

To adjust the stitch width, slide the stitch

Overcasting Stitches

Stitch Name

Raise the presser foot lever to check that the

Basic Stitching

Blind Hem Stitching

Adjust the stitch width until the needle

Buttonhole Stitching

Use chalk to mark on the fabric the position

If the button does not fit in the button guide

Raise the presser foot lever, remove the

Select

Place the button into button-sewing foot “M”.

Zipper Insertion

Select stitch

Press the seam allowance so that the right side

Close the zipper, turn over the fabric, and

Cut out the appliqué, leaving a seam

Patchwork (crazy quilt)

Baste the fabric to be quilted.

Using the optional quilting guide

Slide the drop feed lever, located at the rear

Reinforcement Stitching

Attach buttonhole foot “A”.

Eyelet Stitching

Decorative Stitching

Use an iron to fold the two pieces of fabric

Attach monogramming foot “N”.

Install the wing needle.

UTILITY STITCHES

Stitch Settings .........................................................................................................96

Turn the balance wheel toward you until the

Probable Cause

Error Message

Changing the needle stop position

APPENDIX

SEWING BASICS

————————————————————————————————————————————————————————

SEWING BASICS - Page 62

Brother CS-8060 User's Guide

Table of Contents

Detailed Information for Brother CS-8060 User's Guide

Related Documents for Brother CS-8060 User's Guide