Setting the bobbin; Bobbin cover release button; Built-in thread cutter- Page 15

12

CONTENTS

BEFORE USE

SEWING

UTILITY STITCHES

MAINTENANCE

SEWING CHAR

T

P

A

TTERNS

(PR

OGRAMMED IN

MA

CHINE)

1

2

Setting the bobbin

1. Slide open the bobbin cover.

1

Bobbin cover

2

Bobbin cover release button

2. Insert the bobbin into the shuttle with the thread direction as

shown in the diagram.

3. Guide the thread end through the slit, then pull the thread to-

ward you to cut off any excess thread.

1

Built-in thread cutter

4. Close the bobbin cover by placing the left end in place and

pressing down lightly on the right end so that it snaps into
place.

*

You can begin sewing immediately without drawing up the bob-
bin thread.

1

2

1

CAUTION

Setting the bobbin improperly may cause the thread tension to
loosen, breaking the needle and resulting in injury.

1

Wound evenly

2

Wound poorly

1

2

CAUTION

Be sure the bobbin is set so the thread unrolls in the
correct direction. If the thread unrolls in the wrong
direction, it may cause the thread tension to be
incorrect or the needle to break.