1. SEWING CHAPTER 2- Page 31

28

5. When sewing is completed, press the “REVERSE STITCH”

button to sew a few reverse stitches.

*

If the needle stop position is set to the down position (the nee-
dle stop position switch key’s LED lamp is lit), press the “NEE-
DLE POSITION” button to raise the needle.

6. Raise the presser foot, remove the fabric and cut the thread.

1

Thread cutter

4. Lower the presser foot. Press the “REVERSE STITCH” but-

ton to sew a few reverse stitches, and then press the “START/
STOP” button. The machine will start sewing at a slow speed.

*

Reverse stitches are sewn while the “REVERSE STITCH”
button is pressed.

*

The sewing speed cannot be adjusted while reverse stitches
are sewn.

6

5

6

5

1

3. While pressing down on the thread and the fabric with your

left hand, turn the balance wheel with your right hand to move
the needle to the sewing start position.

1

Thread

*

You can begin sewing without drawing up the bobbin thread.

6

CONTENTS

BEFORE USE

SEWING

UTILITY STITCHES

MAINTENANCE

SEWING CHAR

T

P

A

TTERNS

(PR

OGRAMMED IN

MA

CHINE)