SMOCKING STITCH; For making decorative stitching; About 10 mm (3/8'')- Page 62
Brother CS-8072 User's Guide
Table of Contents
59
J
SMOCKING STITCH
3. Pull the bobbin threads to obtain the desired amount of gather,
and then smooth the gathers by ironing them.
4. Attach presser foot “J” and select the decorative smocking stitch
to sew the spaces between the straight seams.
5. Pull out the straight stitch threads.
For making decorative stitching
17
18
J
1. Select “
1
” press the stitch length manual change key to turn
on the LED lamp. Move the stitch length adjustment lever up
to increase the stitch length (about 4 mm (3/16")) as shown
left figure, and select a weak thread tension.
2. Sew the seams, leaving about 10 mm (3/8'') between the
seams.
1
About 10 mm (3/8'')
Detailed Information for Brother CS-8072 User's Guide
Lists of information found in Brother CS-8072 User's Guide - Page 62
- 3. Pull the bobbin threads to obtain the desired amount of gather, and then smooth the gathers by ironing them.
- 4. Attach presser foot “J” and select the decorative smocking stitch to sew the spaces between the straight seams.
- 5. Pull out the straight stitch threads.
- 1. Select “ 1 ” press the stitch length manual change key to turn on the LED lamp.
- 2. Sew the seams, leaving about 10 mm (3/8'') between the seams.
Related Documents for Brother CS-8072 User's Guide
All trademarks are property of their respective owners. Tightrope
Interactive