MAINTENANCE; CLEANING THE MACHINE; Cleaning the operation panel- Page 70

67

5

6

If the operation panel is dirty, gently wipe it with a soft, dry cloth. Do not use organic solvents or detergents.

Cleaning the operation panel

If the surface of the machine is dirty, lightly soak a cloth in a neutral detergent, squeeze it out firmly and then
wipe the surface. Then wipe again with a dry cloth.

Cleaning the machine casing

If dust or bits of dirt collect in the race or shuttle, the machine will not run well. Keep the machine clean for best
results.

Cleaning the race and shuttle

CLEANING THE  MACHINE

MAINTENANCE

6

1

5

CAUTION

Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may
result.

1. Turn off the power. Remove the presser foot

holder and the needle.

2. Loosen the screws with the disc-shaped screw-

driver and remove the needle plate.

1

Needle plate

3. Turn the balance wheel, and align the notch of

shuttle a little to the left of the shelf of race, as
shown.

CAUTION
Be sure to turn the balance wheel towards the
front of the machine. Turning the balance
wheel in the other direction may damage the
machine.

1

Notch of shuttle

2

Shelf of race

1

2

CONTENTS

BEFORE USE

SEWING

UTILITY STITCHES

MAINTENANCE

SEWING CHAR

T

P

A

TTERNS

(PR

OGRAMMED IN

MA

CHINE)