5
I
II
III
A. MAIN POWER SWITCH AND
CONNECTORS
1
Main power switch
Use to turn on/off the main power.
2
Foot controller jack
Use to connect the foot controller.
3
Power cord
Use to connect the machine to the power supply.
CAUTION
–
When leaving the machine unattended, the
main switch of the machine should be
switched off or the plug must be removed
from the socket-outlet.
–
When servicing the machine, or when remov-
ing covers or changing bulbs, the machine
or the electrical set must be unplugged.
–
For U.S.A. only
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electrical shock, this plug is intended
to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, re-
verse the plug. If it still does not fit, contact a
qualified electrician to install the proper out-
let. Do not modify the plug in any way.
B. FLATBED ATTACHMENT WITH
ACCESSORY COMPARTMENT
I
Tilt the lid of the accessory compartment toward
you to open it.
II
Each presser foot can be identified by the sym-
bol on it.
1
Presser foot symbol
III
COMPARTMENT ACCESSORY LIST
The location of each accessory is shown in fig-
ure
III
.
1
Buttonhole foot “A”
X57789-101
2
Overcasting foot “G”
X51162-001
3
Monogramming foot “N”
137988-101
4
Zipper foot “I”
X59370-051
5
Space for Zigzag foot “J” *
137748-101
6
Blind stitch foot “R”
X56409-001
7
Seam ripper
X54243-001
8
Bobbins
SA155
XA3812-051
9
Needle set
X58358-001
No.
Part Name
Part Code
U.S.A.
Others
*
The machine comes with zigzag foot “J” attached.
*
The spaces marked with “
★
” are empty. No en-
closed accessories fit in these spaces.
*
Always use the plastic bobbin which is supplied
with the machine or in the accessory compartment.
*
Always use accessories recommended for this
machine.
2
1
3
1
J
5
1
2
4
3
6
★
★
★
9
8
7