Packing and shipping the machine; 6 - 16- Page 88

6 - 16

   TROUBLESHOOTING AND ROUTINE MAINTENANCE

Packing and shipping the machine

Whenever you transport the machine, use the packing materials that 
came with your machine. If you do not pack the machine properly, 
you could void your warranty.

Caution

It is important to allow the machine to ‘park’ the print head after a 
print job. Listen carefully to the machine before disconnecting it from 
the power source to ensure that all mechanical noise has stopped. 
Not allowing the machine to complete this parking process may lead 
to print problems and possible damage to the print head.

1

Lift the scanner cover from the right-hand side of the machine 
until it locks securely into the open position.

2

Remove all the ink cartridges and attach the protective parts. 
(See 

Replacing the ink cartridges

 on page 6-22.)

Caution

If you are not able to find the protective parts, do NOT remove the ink 
cartridges before shipping. It is essential that the machine be 
shipped with the protective parts or the ink cartridge in position. 
Shipping without them will cause damage to your machine and may 
void your warranty.

When attaching the protective parts, 
make sure they clip into place as shown in the diagram.