For Mac OS® 9.1 to 9.2; Start Here 9.1-9.2; Improper Setup- Page 20

Installing the Driver & Software

18

STEP2

Maci

nt

osh

®

USB

Macintosh

®

For Mac OS

®

 9.1 to 9.2

Important

Make sure that you have finished the 
instructions from Step 1 

Setting Up the 

Machine

 on page 4-9.

1

Unplug the machine from the AC outlet and 
from your computer, if you already connected 
an interface cable.

2

Turn on your Macintosh

®

.

3

Put the supplied CD-ROM into your CD-ROM 
drive.

4

Double-click the 

Start Here 9.1-9.2

 icon to 

install the printer and scanner drivers. If the 
language screen appears, choose your 
language.

5

Click 

MFL-Pro Suite

 to install.

6

Follow the on-screen instructions, and restart 
your Macintosh

®

.

7

Open the scanner cover to its open position.

8

Connect the USB cable to the USB socket 
marked with a 

 symbol. You will find the 

USB socket above and to the left of the ink 
cartridge slots, as shown below.

9

Carefully route the USB cable through the 
trench and out the back of the machine as 
shown below.
Then, connect it to your Macintosh

®

.

Improper Setup

• DO NOT connect the machine to a USB port on 

a keyboard or a non-powered USB hub. 
Brother recommends that you connect the 
machine directly to your computer.

• Make sure that the cable does not restrict the 

cover from closing, or an error may occur.

10

Lift the scanner cover to release the lock. 
Gently push the scanner cover support down 
and close the scanner cover.