3 Installing the power cord; Improper Setup; Setting Up the Machine- Page 7

Setting Up the Machine

5

4

Fan the stack of paper well to avoid paper jams 
and misfeeds.

5

Gently put the paper into the paper tray print 
side down and top edge first.
Check that the paper is flat in the tray and 
below the maximum paper mark (1).

Note

• Make sure the paper side guides touch the sides 

of the paper.

• Be careful that you do not push the paper in too 

far; it may lift at the back of the tray and cause 
paper feed problems.

6

Put the output paper tray back on and push the 
paper tray firmly back into the machine.

 3

Installing the power cord

1

Connect the power cord.

Improper Setup

DO NOT connect the USB cable yet.

Note

The control panel warning LED will stay on until 
you have installed the ink cartridges.

1