4 Installing the ink cartridges; Improper Setup; Setting Up the Machine- Page 8

Setting Up the Machine

6

STEP1

 4

Installing the ink cartridges

Warning

If ink gets in your eyes, wash them out with water 
at once, and if irritation occurs consult a doctor.

1

Make sure that the power is turned on.
The LCD shows: 

No Cartridge

2

Lift the scanner cover (1) from the right-hand 
side of the machine until it locks securely into 
the open position.

3

Remove the protective parts (1).

Note

Do not throw away the protective parts. You will 
need them if you transport the machine.

4

Take out the ink cartridge.

5

Carefully remove the protective yellow cap (1).

Improper Setup

DO NOT touch the area shown in the 
illustration below.

Note

If the protective yellow cap comes off when you 
open the bag, the cartridge will not be damaged.

Keep the ink cartridge in an upright position 
when you put it into the slot.

1

1

11

OK

OK