Packing and shipping the machine; Packing and shipping - Page 89

Troubleshooting and Routine Maintenance

77

B

Packing and shipping 

the machine

B

When you transport the machine, use the 
packing materials that came with your 
machine. If you do not pack the machine 
properly, you could void your warranty.

CAUTION

It is important to allow the machine to ‘park’ 
the print head after a print job. Listen 
carefully to the machine before unplugging 
it to make sure that all mechanical noise 
has stopped. Not allowing the machine to 
finish this parking process may lead to print 
problems and possible damage to the print 
head.

a

Open the ink cartridge cover.

b

Press the lock release lever to release 
the ink cartridge and take out all the ink 
cartridges. (See 

Replacing the ink 

cartridges

 on page 69.)

c

Install the green protective part and then 
close the ink cartridge cover.

CAUTION

Make sure that the plastic tabs on both 
sides of the green protective part (1) have 
securely clicked into place (2).

If you are not able to find the green 
protective parts, DO NOT remove the ink 
cartridges before shipping. It is essential 
that the machine be shipped with either the 
green protective parts or the ink cartridges 
in position. Shipping without them will 
cause damage to your machine and may 
void your warranty.

d

Unplug the machine from the AC power 
outlet.

e

Using both hands, use the plastic tabs 
on both sides of the machine to lift the 
scanner cover until it locks securely into 
the open position. Then unplug the 
interface cable from the machine, if it is 
connected.

1

2