For Network Interface Users (DCP-560CN only) (For Mac OS® X 10.2.4 or greater); Improper Setup; Installing the Driver & Software- Page 27

Installing the Driver & Software

25

Macintosh

®

Ma

c

int

os

h

®

Netw

o

rk

4

For Network Interface Users (DCP-560CN only)
(For Mac OS

®

 X 10.2.4 or greater)

Important

Make sure that you have finished the 
instructions from STEP 1 

Setting Up the 

Machine

 on pages 4 through 11.

Note

• For  Mac  OS

®

 X 10.2.0 to 10.2.3 users, upgrade to 

Mac OS

®

 X 10.2.4 or greater. (For the latest 

information for Mac OS

®

 X, visit 

http://solutions.brother.com)

• Make sure there are no memory cards or a USB 

Flash memory drive inserted into the media drives 
or USB direct interface at the front of the machine.

1

Using both hands, use the plastic tabs on both 
sides of the machine to lift the scanner cover 
until it locks securely into the open position.

2

Insert the network cable into the LAN socket 
marked with a 

 symbol. You will find the 

LAN socket inside the machine on the left as 
shown below.

3

Carefully route the network cable through the 
trench and out the back of the machine as 
shown below.
Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the 
cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide 
both cables through the trench with one on top of 
the other.

4

Lift the scanner cover to release the lock  .
Gently push the scanner cover support 
down

 and close the scanner cover  .

5

Turn on the machine by connecting the power 
cord.