Safety precautions; To use the DCP safely- Page 9

vii

Safety precautions

We use the following icons throughout this User’s Guide.

To use the DCP safely

Please keep these instructions for later reference and read them before attempting any 
maintenance.

Warnings tell you what to do to prevent possible personal injury. 

Electrical Hazard icons alert you to a possible electrical shock.

Hot Surface icons warn you not to touch DCP parts that are hot.

Cautions specify procedures you must follow or avoid to prevent possible damage to the 
DCP or other objects.

Improper Setup icons alert you to devices and operations that are not compatible with the 
DCP.

Notes tell you how you should respond to a situation that may arise or give tips about how 
the current operation works with other features.

WARNING

There are high voltage electrodes inside the DCP. Before 
you clean the inside of the DCP, make sure you have 
unplugged the power cord from the AC power outlet.

Do not handle the plug with wet hands. Doing this might 
cause an electrical shock.

After you use the DCP, some 
internal parts are extremely 
HOT!
To prevent injuries, be careful 
not to put your fingers in the 
areas shown in the illustration.

The fuser unit is marked with a caution label. Please do not 
remove or damage the label.