8.4.3 Placement of CIS Unit in Position for Transportation (Function code 06); Procedure ; 8.4.3 Placement of CIS Unit in Position for Transportation (Function code 06) - Page 165

  8 - 8  

Confidential

8.4.3  Placement of CIS Unit in Position for Transportation (Function code 06) 

„

 Function 

This function is to move the CIS unit in position for transportation located at the right end. 
When you fix the FAX equipment and check its operation, you need to perform this function  
right before packing and shipping it. 

NOTE:

 Please instruct end users to perform this function if possible before packing and  

shipping their FAX equipment to a sales agent or a service dealer for the purpose of  
repair.  (For the procedure to allow users to perform maintenance modes, please 

see  

P.8-3

.) 

„

 Operating 

Procedure 

(1) MFC7420/7820N 

Press the 

0

 and 

6

 keys in this order in the initial stage of the maintenance mode. 

DCP7010/7020/7025 
Press the   key or   key several times to display the “MAINTENANCE 06” code on 
the LCD. Then press the 

Set

  key . 

The CIS unit moves to the designated position for transportation located at the right  
end.  The “MAINTENANCE 06” is displayed until the CIS unit is placed in position. 
When the CIS unit is placed in the position, the “PLEASE SCAN LOCKED” appears on  
the LCD. 

(2)  Open the document cover, and lock the scanner lock lever at the rear left of the scanner 

unit.  When the scanner lock lever is locked, the “SCAN LOCKED” appears.   

To terminate this operation, press the 

Stop/Exit

 key.  The machine returns to the initial  

stage of the maintenance mode.