Set ; NOTES: - Page 170

  8 - 1 3  

Confidential

DCP7010/7020/7025 

(1) Press the   key or   key several times to display the “MAINTENANCE 10” code on the 

LCD. Then press the 

Set

  key. 

The machine displays the "WSW00" on the LCD and becomes ready to accept a 
firmware switch number. 

(2) Press the   key or   key to display the firmware switch which is desired to be changed 

on the LCD. Then press the 

Set

  key . 

The following appears on the LCD: 

Selector 1 

Selector 8 

↓

↓

WSWXX 

= 

0 0 0 0 0 0 0 0 

(3)  Enter “1” by pressing the   key. Enter “0” by pressing the   key. The cursor will be 

shifted to the right by one position. Repeat this operation to modify the Selector from 
Selector 1 to Selector 8. 

(4) Press the 

Set 

key. This operation saves the newly entered selector values onto the 

EEPROM and readies the machine for accepting a firmware switch number. 

(5)  Repeat steps (2) through (5) until the modification for the desired firmware switches is 

completed. 

(6)  Press the 

Stop/Exit 

key to return the machine to the initial stage of the maintenance 

mode.

NOTES: 

•  To cancel this operation and return the machine to the initial stage of the maintenance 

mode during the above procedure, press the 

Stop/Exit 

key. 

•  If there is a pause of more than one minute after a single-digit number is entered for 

double-digit firmware switch numbers, the machine will automatically return to the 
initial stage of the maintenance mode. 

„

  Details of Firmware Switches 

• 

The details of the firmware switches are described in 

Appendix 4

 in which the user- 

accessible selectors of the firmware switches are shaded. 

• 

Machine w/o fax support some selectors of firmware switches.  Those selector numbers  
are circled.