8.4.10 Received Data Transfer Function (Function code 53) (MFC7420/7820N only); Procedure ; Received Data Transfer Function (Function code 53) - Page 177

  8 - 2 0  

Confidential

8.4.10 

Received Data Transfer Function (Function code 53)  
 (Not applicable to DCP7010/7020/7025) 

„

 Function 

This function transfers received FAX data to another machine.  It is useful when the 
machine cannot print received data due to the printing mechanism defective. 

NOTE:

 The number of files that can be transferred at a time is 99.  To transfer 100 files or  

more, carry out the following procedure more than one time. 

„

 Operating 

Procedure 

(1) Press the 

5

 and 

3

 keys in this order in the initial stage of the maintenance mode. 

The "FAX TRANSFER" appears on the LCD. 

(2)  To check the number of received files, press the 

1

 key. 

The "1.NO. OF JOBS" appears on the LCD. 
Press the 

Menu/Set

 key, and the number of received files appears, just as "NO. OF.  

JOBS: 10." 

(3)  To transfer the activity report only, press the 

2

 key. 

The "2.ACTIVITY" appears. 
To transfer received files (together with the activity report), press the 

3

 key. 

The "3.DOCUMENTS" appears. Note that if there is no received file, the "NO  
DOCUMENTS" appears. 

(4)  To transfer the communication list for the latest communication, press the 

4

 key. 

The "4.COM.LIST (NEW)" appears. 
To transfer the communication list for last three errors, press the 

5

 key. 

The "5.COM.LIST (ERR3)" appears. 

(5)  With the "2.ACTIVITY," "3.DOCUMENTS," "4.COM.LIST (NEW)," or "5.COM.LIST 

(ERR3)" being displayed, press the 

Menu/Set

 key. 

The "ENTER NO. &SET" appears. 

(6)  Enter the telephone number of the receiver machine and press the 

Menu/Set

 key again. 

NOTE:

 Be sure to type the telephone number with the numerical keys.  No one-touch  

dialing is allowed in this procedure. 
The machine displays the "ACCEPTED" for approx. two seconds and starts dialing  
to transfer data. 
No station ID will be attached.  A cover page and end page as shown on the next  
page will be automatically attached, instead.