Enter ; Installing the Update Data onto the Flash ROM of the Machine; On a PC running Windows 95- Page 253

  Ap p .  

2 -2  

Confidential

Installing the Update Data onto the Flash ROM of the Machine

„

On a PC running Windows 95

(1)  Copy the update data and transfer utility onto the desired same directory of the hard disk.  e.g., 

C:\UPDATE 

(2) Click the 

Start

 button, point to Programs, and then click MS-DOS Prompt to open an MS-

DOS window. 

(3) Type the drive letter where the update data and transfer utility are located. In the above 

example, type C:\ from the command line and press the 

Enter 

key. 

Then type CD UPDATE and press the 

Enter 

key. 

(4)  To start the transfer utility transmitting the update data to the flash ROM of the machine, type 

the following: 

ICEN 

filename 

/b 

Where 

filename 

is an update data file, e.g., 7820xxxx.dat. 

Then press the 

Enter 

key. 

During downloading, the machine beeps 

intermittentl

y. 

Upon completion of the downloading, the machine beeps 

continuousl

y. 

NOTE:

 If the machine cannot return to the standby state after completion of downloading,  

turn the power off and on. 

„

On a PC running Windows 98/Me/2000

(1) Install the printer driver for the parallel port to your PC.  (Once installed, no more printer 

driver is required for your PC.) 

(2)  Copy the update data onto the desired directory of the hard disk. 

e.g., C:\UPDATE 

(3)  Copy the transfer utility “Filedg32.exe” onto the desired directory of the hard disk. 

(4) Run “Filedg32.exe”. 

The Filedrgs window will appear as shown below. (e.g., MFC7820N) 

(5)  Drag and drop the update data onto the icon of the model being used in the Filedrgs windows. 

During downloading, the machine beeps 

intermittentl

y. 

Upon completion of the downloading, the machine beeps 

continuousl

y. 

NOTE:

 If the machine cannot return to the standby state after completion of downloading,  

turn the power off and on.