Busy tone detection in automatic sending mode - Page 271

 App. 

4-8 

Confidential

  Selectors 1 through 3:  1st dial tone detection 

These selectors activate or deactivate the 1st dial tone detection function which detects the 1st dial  
tone issued from the PSTN when a line is connected to the PSTN. 
Setting all of these selectors to "1" activates the dial tone detection function so that the machine  
starts dialing upon detection of a dial tone when a line is connected. (However, in those countries  
which support no dial tone detection function, e.g., in the U.S.A., setting these selectors to "1"  
makes the machine start dialing after a WAIT of 3.5 seconds.) For the detecting conditions of the  
1st dial tone, refer to WSW07 and WSW08. 
Other setting combinations deactivate the dial tone detection function so that the machine starts  
dialing after the specified WAIT (3.5, 7.0, 10.5, 14.0, 17.5, 21.0, or 24.5 seconds) without  
detection of a dial tone when a line is connected to the PSTN. 

  Selector 4:  Max. pause time allowable for remote ID code detection 

This selector sets the maximum pause time allowable for detecting the second digit of a remote ID  
code after detection of the first digit in remote reception. 
If selector 4 is set to "0" (2 seconds), for instance, only a remote ID code whose second digit is  
detected within 2 seconds after detection of the first digit will become effective so as to activate  
the remote function. 

  Selectors 5 and 6: 

Busy tone detection in automatic sending mode 

These selectors determine whether or not the machine automatically disconnects a line upon  
detection of a busy tone in automatic sending mode. 
Setting selector 6 to "0" ignores a busy tone so that the machine does not disconnect the line. 
Setting selectors 5 and 6 to "0" and "1," respectively, makes the machine detect a busy tone only  
after dialing and disconnect the line. 
Setting both of selectors 5 and 6 to "1" makes the machine detect a busy tone before and after  
dialing and then disconnect the line. 

  Selector 7:  Busy tone detection in automatic receiving mode 

This selector determines whether or not the machine automatically disconnects the line upon  
detection of a busy tone in automatic receiving mode.