5 Connecting the phone line; Setting Up the Machine; Connecting the phone line - Page 6

Setting Up the Machine

4

4

Fan the stack of paper well to avoid paper jams 
and misfeeds.

5

Gently put the paper into the paper tray print 
side down and top edge first.
Check that the paper is flat in the tray.

6

Gently adjust the paper side guides with both 
hands and the paper length guide to fit the 
paper.
Make sure that the paper side guides and 
paper length guide touch the edges of the 
paper.

Note

Be careful that you do not push the paper in too 
far; it may lift at the back of the tray and cause 
paper feed problems.

7

Close the output paper tray cover (1) and slide 
it forward.

Note

If you are using Legal size paper the paper tray 
cover does not slide all the way to the end of the 
paper tray.

8

Slowly push the paper tray comletely into the 
machine.

9

While holding the paper tray in place, pull out 
the paper support (

) until it clicks and unfold 

the paper support flap (

).

Note

Do not use the paper support flap for Legal paper.

 5

Connecting the phone line 

1

Connect the telephone line cord. Connect one 
end of the telephone line cord to the jack on the 
machine marked 

LINE

 and the other end to a 

modular wall jack.

1

2

1