92
Printing Received Faxes
Difficulty
Suggestions
Condensed print and white streaks
across the page or the top and
bottom of sentences are cut off.
You probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
Received color fax prints only in
black and white.
Replace the color ink cartridges that are empty or nearly empty, and then ask the
other person to send the color fax again. (See
Left and Right margins are cut off or
a single page is printed on two
pages.
Printing a reduced incoming fax
Phone Line or Connections
Difficulty
Suggestions
Dialing does not work. (No dial
tone)
Check that the machine is plugged in and switched on.
Check all line cord connections.
(Canada only) Change Tone/Pulse setting. (See
Quick Setup Guide
.)
Send a fax manually and wait to hear fax receiving tone before pressing
Black Start
or
Color Start
. (See
The machine does not answer
when called.
Make sure the machine is in the correct receiving mode for your setup. (See
on page 34.) Check for a dial tone. If possible, call your machine
to hear it answer. If there is still no answer, check the telephone line cord
connection. If there is no ringing when you call your machine, ask your telephone
company to check the line.
Receiving Faxes
Difficulty
Suggestions
Cannot receive a fax
Check all line cord connections.
Make sure the machine is in the correct receiving mode for your setup. (See
If you often have interference on the phone line, try changing the menu setting of
Compatibility to
Basic
or
Normal