6 - 8; Change the Fax ; Forwarding, Paging or Fax - Page 96

REMOTE FAX OPTIONS   

6 - 8

95

Change the Fax 
Forwarding, Paging or Fax 
Storage settings

1 OFF

You can select 

Off

 after you have retrieved 

or erased all your messages.

2 Fax Forwarding

If you hear one long beep, the change has 
been accepted. If you hear three short beeps, 
you cannot change it because something has 
not been set up (for example, perhaps a Fax 
Forwarding or paging number had not been 
registered). You can register your Fax 
Forwarding number by entering 4. 
(See 

Changing your Fax Forwarding number

on page 6-10.) Once you have registered the 
number, Fax Forwarding will work.

You can select 

Off

 after you have retrieved 

or erased all your messages.

3 Paging

4 Fax Forwarding number

6 Fax Storage 

96

Retrieve a fax

2 Retrieve all faxes

Enter the number of a remote fax machine to 
receive stored fax message(s). (See page 
6-10.)

3 Erase faxes from the 

memory

If you hear one long beep, fax messages 
have been erased from the memory.

97

Check the receiving status 
(Except for FAX-1940CN)

1 Fax

You can check whether your machine has 
received any faxes. If yes, you will hear one 
long beep. If no, you will hear three short 
beeps.

97

Check the receiving status 
(FAX-1940CN only)

You can check whether your machine has 
received any fax or voice messages. If yes, 
you will hear one long beep. If no, you will 
hear three short beeps.

1 Fax

2 Voice

Remote commands

Operation details