Remote Fax commands; Playing Voice messages; Erase all ICM- Page 81

Remote fax options (Black & White only)

65

10

Remote Fax commands

10

Follow the commands below to access features when you are away from the machine. When you 
call the machine and enter your remote access code (3 digits followed by 

l

), the system will give 

two short beeps and you must enter a remote command.

Remote commands

Operation details

91

Playing Voice messages

(FAX-2580C only)

After one long beep, the machine plays the ICM.

1 Repeat or Skip Backward

Press 

1

 while listening to an ICM to repeat it. If you press 

1

before a message, you will hear the previous message.

2 Skip Forward

While playing the ICM, you can skip to the next message.

9 STOP Playing

Stop Playing the ICM. 

93

Erase all ICM

(FAX-2580C only)

If you hear one long beep, the erase is accepted. If you hear 
three short beeps, you cannot erase because all voice 
messages have not been played, or there are no voice 
message to erase.

*This code erases all recorded messages, not one at a time.

94

Play and Record OGM in Memory

(FAX-2580C only)

1  Play

1  Msg  Ctr OGM

The machine plays the selected OGM. You can stop playing 
OGMs by pressing 

9

.

2 F/T OGM

2 Record

1 Msg Ctr OGM

After one long beep, you can record the selected OGM. You 
will hear the message played once. You can stop recording 
the message by pressing 

9

.

2 F/T OGM

95

Change the Fax Forwarding, 
Paging or Fax Storage settings

1 OFF

You can choose 

Off

 after you have retrieved or erased all 

your messages.

2 Fax Forwarding

One long beep means the change is accepted. If you hear 
three short beeps, you cannot change because something 
has not been set up (for example, a Fax Forwarding or 
Paging number has not been registered). You can register 
your Fax Forwarding number by entering 4. (See 

Changing 

your Fax Forwarding number

on page 67.) Once you have 

registered the number, Fax Forwarding will work.

3 Paging

4 Fax Forwarding number

6 Fax Storage 

96

Retrieve a fax

2 Retrieve all faxes

Enter the number of a remote fax machine to receive stored 
fax messages. (See 

Retrieving fax messages

on page 67.)

3 Erase faxes from the memory

If you hear one long beep, fax messages have been erased 
from the memory.

97

Check the receiving status

(FAX-2480C only)

1 Fax

You can check whether your machine has received any 
faxes. If yes, you will hear one long beep. If no, you will hear 
three short beeps.