Setting Beeper Volume; Setting the Handset Volume; It is important that you do not choose PERMANENT unless all users- Page 41

27

I N I T I A L S E T U P

Setting Beeper Volume

You can set the beeper to LOW, HIGH or OFF. The default setting is LOW.
When the beeper is set to LOW or HIGH, the fax machine beeps every time
you press a key or make an error, and at the end of fax sending or receiving.

1

Press 

Function

, 

1

, 

4

.

2

Press 

 or 

 to select your setting and press 

Set

.

3

Press 

Stop

 to exit.

Setting the Handset Volume

Before you begin to use the fax machine, you must decide if you need to set
the handset volume to AMPLIFY:ON for a user who is hearing-impaired.
The AMPLIFY volume level complies with FCC standards.

VOLUME AMPLIFY: OFF

This default setting is appropriate if none of the users are hearing-impaired.
During a conversation, users can press 

 or 

 on the control panel to

adjust the volume. When the handset is replaced, the handset volume remain
until you change it again.

VOLUME AMPLIFY: ON–TEMPORARY

This setting is appropriate if some of the users are hearing-impaired. During
a conversation, users can press 

 or 

 on the control panel to adjust

the volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the
handset volume will returns to the default setting of LOW.

VOL AMPLIFY:ON–PERMANENT

Choose VOL AMPLIFY:ON–PERMANENT if all of the users are hearing-
impaired. During a conversation, users can press 

 or 

 on the

control panel to adjust the volume to LOW, HIGH or AMPLIFY. When the
handset is replaced, the handset volume returns to the default setting of
AMPLIFY.

When you press 

 or 

 on the control panel to adjust the volume, the

display shows the setting you are choosing. Each key press changes the
volume to the next setting.

It is important that you do not choose PERMANENT unless all users
are hearing-impaired. Otherwise, the default setting of AMPLIFY may
damage the hearing of some users.