Setting Volume Amplify; Setting the Speaker Volume; Setting the Ring Volume- Page 42

28

C H A P T E R F O U R

Setting Volume Amplify

Please carefully read “Setting the Handset Volume” before you do the
following steps:

1

Press 

Function

, 

1

, 

5

.

SELECT <- -> & SET

VOL AMPLIFY:OFF?

2

Press 

 or 

 to select VOL AMPLIFY:OFF? if none of the

users are hearing-impaired and go to Step 4—OR—If some or all of the
users are hearing-impaired, select VOL AMPLIFY:ON?.

SELECT <- -> & SET

PERMANENT?

3

Press 

 or 

 to select PERMANENT? if all the users are

hearing-impaired—OR—Select TEMPORARY? if only some of the
users are hearing-impaired.

4

Press 

Set

.

5

Press 

Stop

 to exit.

Setting the Speaker Volume

You can adjust the speaker volume when your fax machine is onhook (after
you pressed 

Hook

), by selecting a speaker volume level.

Press 

 or 

 to adjust the volume level. The display shows the setting

you are choosing. Each key press changes the volume to the next setting.
The new setting will remain until you change it again.

Setting the Ring Volume

You can adjust the ring volume when your fax machine is idle. You can
select a ring volume level or press until the ring is off.

Press 

 or 

 to adjust the volume level. With each key press, the

fax machine rings so you can hear the current setting and the display shows
the setting you are choosing. Each key press changes the volume to the next
setting. The new setting will remain until you change it again.

Memory Storage

In the event of a power failure, all settings in the INITIAL SETUP, SETUP
RECEIVE and SET AUTO DIAL functions are stored permanently. You
may have to reset the date and time.