7-2-9. Cleaning the Carriage Shafts; 7-2-9. Cleaning the Carriage Shafts - Page 105

7. Troubleshooting 

GT-541 

95 

7-2-9. Cleaning the Carriage Shafts 

If the error message “Fail: CRG Speed” or “Fail: CRG Stop 1” is displayed, the Carriage Shafts 
might be smudged with inks and dusts. Clean and oil the Carriage Shafts following the procedure 
below. 

(1)  Turn off your printer. 
(2)  Open the Front Cover by unlocking the Cover Locks with both hands 
(3)  Wipe the Carriage Shafts with a cloth soaked with alcohol. 

<Note> 
Do not move the Print Heads. 

Carriage Shafts

Print Heads 

(4)  Soak a cloth with sewing oil and use it to apply the sewing oil on the Carriage Shafts. 
(5)  Close the Front Cover. 
(6)  Turn on your printer. 
(7)  Adjust the timing of firing. See "7-2-8. Adjustment after the Print Head replacement".