GT-541 - Page 111

7. Troubleshooting 

GT-541 

101 

(14) Insert the Wiper Cleaner Cassette straight into your printer. 

<Note> 
Do not touch the Clearance Sensor (the bar above the Wiper Cleaner Cassette);   

(15) Close the Front Cover, and then turn on your printer. 

If your printer turns on without any problem, replacement of the Wiper Blade has been completed. 
If there is problem ( such as abnormal noise or an error )then turn off your printer, and check if the 
Wiper Blade, the Wiper Cleaner and the Wiper Cleaner Cassette are correctly installed.